| Item | Specification |
| CPU |
Intel® Celeron® Processor
2.0GHz(FSB400MHz) |
| Chip-Set |
Intel® 845GV |
| Memory |
L2 Cache |
256KB |
| Main Memory |
Standard 512MB *1 Max. 2GB(1GB×2)，2.5V
184 Pin DDR SDRAM
PC2100 DIMM Socket×2 |
| BIOS ROM |
128KB E0000H - FFFFFH
(Award) |
| Video |
Controller |
Intel® 845GV (Built into the controller) |
| Video RAM |
Main memory shared |
| Video BIOS |
48KB (C0000H - CBFFF) |
| Display I/F |
DVI-I 29 Pin *2 |
| System resolution |
640×480(16,770,000 colors),800×600(16,770,000 colors),
1024×768(16,770,000 colors),1280×1024(16,770,000 colors),
1600×1200(16,770,000 colors) |
| Audio |
AC97 Standard
Line IN:Φ3.5 Stereo mini jack
Full-scale input level 1.3Vrms (Typ.)
Line OUT: Φ3.5 Stereo mini jack
Full-scale input level 1.0Vrms(Typ.),
Dual 250mW Amplifier
MIK IN:Φ3.5 Monaural mini jack
Full-scale input level 1.3Vrms (Typ.)
|
IDE
HDD
I/F |
Primary |
Ultra DMA/100 2.5 inch IDE HDD or
silicon disk drive: 1 internal unit(Primary IDE Master) |
| Secondary |
Equipped with a dedicated 36pin, half-pitch connector
(for connection of an optional CD-ROM/DVD-ROM drive)
(Secondary IDE Master) |
| CFcard slot |
CF CARD Type Ⅰ,Ⅱ×1(dedicated to memory card)(Secondary IDE Slave) |
| Serial I/F |
RS-232C(general-purpose): 4ch (SERIAL PORT1, 2, 3, 4) 9 pin D-SUB connector
RS-232C(touch panel): 1ch (SERIAL PORT5) [inside the DVI connector] *3
RS-422/485(general-purpose): 1ch (SERIAL PORT6) [inside the RAS connector]
Baud rate: SERIAL1, 2 is 115,200bps, SERIAL3 - 6 is 921,600bps |
| LAN1 |
I/F |
Ethernet 100BASE-TX/10BASE-T
RJ-45 connector |
| Controller |
Intel® ICH4(Built into the controller) |
| LAN2 |
I/F |
Ethernet
1000BASE-T/100BASE-TX/10BASE-T RJ-45 connector |
| Controller |
Intel® 82541PI |
| USB I/F |
4ch(USB 2.0 specification) |
| keyboard I/F |
Support PS/2 keyboard (6pin mini-DIN connector) |
| Mouse I/F |
Support PS/2 mouse (6pin mini-DIN connector) |
| General I/O |
3 opto-isolated inputs and outputs
(However, one output also serves as an external WDT output and one input also serves
as remote reset. They become available when switched.)
|
| RAS function |
WDT: 1sec - 255sec(RESET, interrupt or external output is allowed at time expiration)
Remote reset: External input signal
|
| Expansion board slot |
PCI slot x 2 (PCI Rev2.0 Standard)
Usable board dimension: 190.00(L)x106.68(H)mm(Max.) |
| RTC/CMOS |
Lithium backup battery life: 10 years or more
The real-time clock is accurate within 3 minutes (at 25℃) per month (ICH4 built in RTC) *4. |
| Power supply |
Input supply voltage |
85-132VAC/170-264VAC(47-63Hz)input automatic switching |
| Current consumption |
190VA (Max.) |
| External device power supply capacity *5 |
·card slot: +5V: 500mA *6
·USB I/F: +5V: 2A (500mA x 4) *6
·Expansion board slot:
+5V: 2A(1Ax2 slot) ※6,+3.3V: 2A(1Ax2 slot),
-5V: unsupply, +12V: 0.5A,
-12V: 80mA |
| External dimension(mm) |
242(W) x 262(D) x 115(H)
(No protrusion) |
| Weight |
About 5.6kg(At the time of the HDD(SDD) uninstalling) |