CONTEC Logo
Products Support DownLoad News Catalog Contact Profile Return TOP

PRESS RELEASE - 2004/6/1 -
Launch of New 6.5-inch Small LCD Monitors with Analog RGB/DVI Connectors and Touch Panel

Embedded LCD Touch Screen Monitors

Color LCD Monitor with 6.5-inch Touch Screen for Embedding
IPC-DT/S61VT-DC1
Color LCD Monitor with Open-frame 6.5-inch Touch Screen
IPC-DT/S65VT-DC1

  CONTEC Co., Ltd., a manufacturer of PC-based measurement interfaces and industrial computers, launched new products of touch-panel displays in the FLAT PANEL DISPLAY Series. The products are 6.5-inch LCD monitors supporting both of the analog RGB and DVI-D interfaces.

  The products are small and lightweight touch-screen monitors best suited for the human-machine interface (HMI) with space-saving embedded computers. The front face of the touch-screen monitor is ingress-protected in conformance to IP65 in consideration of embedded applications. For the touch screen, mouse emulator software for Windows is provided, facilitating its use by connection with the PC using a USB or serial (RS-232C) cable.

  The IPC-DT/S65VT-DC1, released along with the IPC-DT/S61VT-DC1, is an open-frame type selectable depending on the touch-screen monitor installation environment.

Color LCD Monitor with 6.5-inch Touch Screen for Embedding
[ IPC-DT/S61VT-DC1 ]


-> Larger image data [508KB]

[ Features ]

  • Full-bright LCD with wide viewing angle capable of displaying up to 262,144 colors
  • Touch panel to be connected with an RS-232C or USB cable
  • Multi-touch-panel configuration enabled, capable of connecting up to eight units to one host via the USB touch panel interface
  • Auto-scaling to adjust the input screen size to the LCD dot configuration
  • On-screen display (OSD) setup screen that facilitates screen adjustment
  • Dual-input support for analog RGB and DVI-D, enabling the display to be connected to two computers at the same time (but not to display data from the two at a time)
  • AC adapter [IPC-ACAP12-01] available as an option for use with an AC power source
  • IPC-DT/S61VT-DC1 with the front face ingress-protected at the IP65 level
[ Specifications ]

ItemIPC-DT/S61VT-DC1IPC-DT/S65VT-DC1
ScreenAssembly typePanel mounted, desktop *1Integration
Screen size6.5 inches
Number of pixels640 x 480 dots
Display typeTFT Color LCD
Number of colors262,144 colors
Screen adjustmentAutomatic adjustment (display positioning and scaling) and manual adjustment using the front switches
Brightness controlAdjustment using the front switch or software control from the host computer.Can be turned on or off by an OSD switch or via software control from the host computer.
Backlight controlCan be turned on or off by an OSD switch or via software control from the host computer.
Display interfaceAnalog RGB input HD-SUB 15 pin (Female) connector
DVI-D input 24 pin DVI (Female) connector
Incoming signal specificationAnalog RGB inputSeparate RGB, analog, positive polarity 0.7Vp-p/75Ω
Separate V/H, TTL, positive/negative polarity
Horizontal: 31 to 80kHz, vertical: 56 to 75Hz
DVI-D inputDigital RGB (complies with TMDS)
Cable length which recommends5mm or less
Touch panelResolution4096 x 4096
Detection methodResistive-layer analog method
Touch activation force0.5N±0.3N
Touch life expectancyOne million repeated touches (silicon rubber load of 3 N)
Touch panel interfaceUSB: USB1.1-compliant, Type-B Connector *2
RS-232C: 9pin D-SUB (Male) Connector
Power supply input part
AC adapter jackAC adapter jack for 12 VDC power supply
(An optional AC adapter (IPC-ACAP12-01) can be used for 100 to 240VAC input.)
Consumption current12VDC ±5% 1.3A (Max.)
Operating temperature0 to 50°C (0°C to 40°C when using an IPC-ACAP12-01 (AC switching adapter))
Storage temperature-10 to 60°C
Floating dust / Corrosive gasNormal / None
Ingress protectionFront part conforming to IP65Front part conforming to IP65 (Use the packing supplied.)
Dimension (mm)198 (W) x 154 (H) x 35 (D) 192 (W) x 166 (H) x 37.5 (D)
Weight1.3kg1.0kg
*1 : Optional desk stand IPC-SND-03 allowing desktop installation
*2 : The touch panel USB interface is only supported on Windows XP/2000/98SE.

[ Contact ]
  • U.S.A. (North & South America Sales)
    CONTEC Microelectronics U.S.A. Inc.

    2161 O'Toole Ave., Suite I,
    San Jose, CA, 95131
    TEL: (1)-408-954-7700  FAX: (1)-408-954-7710
    E-mail: sales@contecusa.com
    Web Site: www.contecusa.com
    PHONE (800)888-8884   Toll Free in the USA
  • EUROPE
    CONTEC Microelectronics EUROPE B.V.

    Binnenweg 4, 2132 CT Hoofddorp,
    The Netherlands
    TEL: (31)-23-567-3030  FAX: (31)-23-567-3035
    E-mail: sales@conteceu.nl
    Web Site: www.contec-europe.com

  • CONTEC GROUPS JAPAN (Headquarters)
    CONTEC Co., Ltd.

    3-9-31, Himesato,
    Nishi-Yodogawaku, Osaka, 555-0025,
    TEL: +81-6-477-5219  FAX: +81-6-477-1692
    E-mail: intsales@osaka.contec.co.jp
    Web Site: www.contec.com
  • PRESS RELEASE - 2004/6/1-

    Copyright