| |
|
Embedded ISA Bus CPU Board Uses the Fanless,
Low Power Consumption Eden ESP4000 CPU
New Half-Size ISA Bus Single-Board Computer
SIS-8601-LVA
|
|
Contec Co. Ltd., a manufacturer of PC-based instrument interfaces and industrial computers, has developed a new compact CPU board for embedded applications. The board supports the ISA bus and uses the x86 compatible 400MHz VIA Eden ESP4000 CPU which features fanless operation and low power consumption. [Product name: Half-Size, ISA Bus, Single-Board Computer. Model: SIS-8601-LVA]. The new board goes on sale from October 25
The SIS-8601-LVA is a compact ISA bus CPU board for embedded applications that is used by mounting in a ISA backplane board (sold separately). The CPU board uses the VIA Apollo PLE133(VT8601A) + VT82C686B chipset, the low heat dissipation/low power consumption VIA Eden ESP4000 400MHz CPU, and supports a maximum of 512MB of SDRAM main memory. An SMI Lynx SM722 (PCI connection, 8MB VRAM) VGA controller is also included. This provides flexible support for a range of different LCD panel displays including TFT, DSTN, and monochrome.
Despite its small size, the board includes an extensive array of on-board devices including a Disk On Chip socket (supports SDDs up to 144MB), an AC97 compliant sound function, and LAN (100BASE-TX/10BASE-T), 2 x USB 1.1, serial, parallel, EIDE and PS/2 external interfaces.
CONTEC can also supply six different types of ISA bus backplane suitable for the SIS-8601-LVA with between 6 and 14 slots each, together with rack-mount, wall-mount, and desktop chassis in appropriate sizes for each backplane size.
|
| [ Features ]
- Low power consumption/fanless VIA Eden ESP4000 400MHz CPU
- Maximum of 512MB of SDRAM memory
- 2 x USB 1.1, LAN, VGA, and Silicon Disk socket (Disk On Chip) interfaces are standard
- Single LAN port with RTL8139D controller
- Southbridge uses advanced VIA VT82C686B chipset which includes Super I/O, hardware monitor, and
PCI-ISA bridge
- Can be used with CONTEC LCD displays via an optional LCD adapter board
- VGA control uses Lynx SM722 from SMI (includes 8MB on-chip VRAM)
- AC97 compliant sound function
|
| [ Options ]
CABLE
- USB Connector Cable USB connector shielded cable
MEMORY MODULE (PC-133 168Pin DIMM, Non Parity)
- PC-MSD128-168V SDRAM 168Pin DIMM 128MB
- PC-MSD256-168V SDRAM 168Pin DIMM 128MB
- PC-MSD512-168V SDRAM 168Pin DIMM 128MB
Digital LCD I/F board
- ADPLCD(PC)H For Digital LCD I/F board
- ADPLNK(PC)H For Panel Link LCD I/F board
Digital I/F Flat Panel Display (SVGA)
- IPC-DT/L30S(PC)T (12.1 inch 800 x 600 dots, Desktop/wall-mounted)
- IPC-DT/L400(PC)A (12.1 inch 800 x 600 dots, Desktop/wall-mounted, without Touch Panel type)
- IPC-DT/L400(PC)TA (12.1 inch 800 x 600 dots, Desktop/wall-mounted)
- IPC-DT/L400(PC)TB (12.1 inch 800 x 600 dots, Desktop/wall-mounted, anti-glare type)
Panel Link I/F Flat Panel Display (SVGA)
- IPC-DT/L40S(PC)T (12.1 inch 800 x 600 dots, Panel mounted type)
- IPC-DT/L440(PC)TA (12.1 inch 800 x 600 dots, Desktop/wall-mounted) *1
- IPC-DT/L440(PC)TB (12.1 inch 800 x 600 dots, Desktop/wall-mounted, anti-glare type) *1
*1: Use this display with the True color mode.
|
| Item | Specification |
| CPU | VIA Eden ESP4000 400MHz(FSB100MHz) |
| Chipset | VIA Apollo PLE133 (VT8601A)+ VT82C686B |
| Cache Size | Level 1 caches 64kB x2, Level 2 cache 64kB |
| Memory (Option) | Up to 512MB PC2100 DDR SDRAM DIMM. No ECC support. |
| Memory Sockets | One 168-pin DIMM socket for SDRAM in 64MB, 128MB, 256MB and 512MB configurations. |
| BIOS | Award BIOS, PnP support Flash EEPROM (256KB) for BIOS update Power management |
| Super I/O | Integrate VT82C686B chipset |
| Parallel port | One high-speed parallel port, SPP/EPP/ECP mode |
| Series Port | Two 16550 UART ports COM2 is RS-232/422/485 configurable. Baud rate: 19200 to 50bps (programmable) |
| Enhanced IDE | One EIDE port, up to 2 IDE devices Support Ultra DMA 33/66/100
|
| FDD Interface | One FDD port Up to 2 Floppy drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB) |
| USB Interface | One box-header support two USB v1.1 ports |
| Watchdog Timer | Software programmable 16 levels (2-30Sec), Reset or NMI (Jumper selectable) |
| Keyboard/Mouse connector | One PS/2 keyboard/Mouse connector and one 5-pins box-header for external keyboard |
| VGA Controller | Lynx SM722 Controller (VRAM:8Mbyte) On board 15 pin HD-SUB VGA connector. |
| LCD I/F | 41 pin TFT LCD panel digital signal connector. CONTEC SVGA(800x600) type TFT LCD Display support. |
| LAN | 100BASE-TX/10BASE-T One Reltek RT8139D controllers, one RJ-45 connector. |
| SSD | SSD: DIP socket supports DiskOnChip flash disks (2MB - 144MB) |
| RTC | The clock is accurate to ±3 minutes/month at 25°C. Battery backup by Lithium Battery (CR2032)
| Specification | CR2032 |
| Nominal Voltage | 3V |
| Nominal Capacity | 220mAh |
| Nominal Weight | 3.1g |
* CThe backup time of the CR2032 battery is over 3 years at 20oC. * The clock is accurate to ±3 minutes/month at 25°C. |
| Audio | AC'97 Codec |
| Power Consumption | +5VDC 3.0A (Max.) +12VDC 0.2A (Max.) +5VSB 0.3A (Max.) |
| Opterating Temperature | 0 to 60°C. |
| Storage Tempperature | - 40 to 80°C. |
| Humidity | 20% to 90% RH (no condensation) |
| Floating dust particles | Not to be excessive |
| Floating dust particles | None |
| Oard Dimension (mm) | 185(L) x 122(H) x 36(W) *2 |
| Form Factor | ISA |
| Board Weight | 300g |
*1: Can connect to CONTEC TFT LCD display via optional I/F board.
DipSW1 is used to select CRT or LCD display. Using both CRT and LCD displays at the same time is not supported.
*2: The board requires two ISA bus slots.
|
|
| [ Contact ] | U.S.A. (North & South America Sales) CONTEC Microelectronics U.S.A. Inc. 2161 O'Toole Ave., Suite I,
San Jose, CA, 95131 TEL: (1)-408-954-7700 FAX: (1)-408-954-7710
E-mail: sales@contecusa.com Web Site: www.contecusa.com
PHONE (800)888-8884 Toll Free in the USA |
EUROPE CONTEC Microelectronics EUROPE B.V.
Binnenweg 4, 2132 CT Hoofddorp, The Netherlands
TEL: (31)-23-567-3030 FAX: (31)-23-567-3035 E-mail: sales@conteceu.nl
Web Site: www.contec-europe.com
|
CONTEC GROUPS JAPAN (Headquarters)
CONTEC Co., Ltd. 3-9-31, Himesato, Nishi-Yodogawaku, Osaka, 555-0025,
TEL: +81-6-477-5219 FAX: +81-6-477-1692 E-mail: intsales@osaka.contec.co.jp
Web Site: www.contec.com |
|
|
|