Panel-mounted flat panel display  with analog RGB/DVI inputs IPC-DT/H61XT-DC1 -> Larger image data [ 187KB ] 500 x 852pix 350dpi  Embedded-type flat panel display  with analog RGB/DVI inputs IPC-DT/H65XT-DC1 -> Larger image data [ 176KB ] 500 x 852pix 350dpi

Contec Co. Ltd., a manufacturer of PC peripherals, industrial computers, and network equipment, has developed and commenced sales of two new 15 inch LCD displays [Product name: Analog RGB/DVI Input Type Flat Panel Display]. The new products belong to the "IPC-DT/60" series of flat panel displays which feature a touch-screen function.  The IPC-DT/60 series now has a total of eight model variations with 15, 12.1, 10.4, and 6.5 inch sizes available with either a panel (with Aluminum face plate) or embedded type (open frame) mounting.  The new products are suitable for a wide range of applications as display units for PCs with an analog RGB (15-pin HD-SUB) output, and can also be used with the latest "Box Computer®" and "Single-Board Computer" industrial computers from CONTEC which use a DVI video output.  The display units also feature a resistive-film analog touch panel which can connect to the PC via a USB or serial (RS-232C) cable to function as a mouse-emulation touch panel input. When used with CONTEC industrial computers (DVI output type), a single DVI-D cable can be used for both the video and touch panel signals, making a USB or serial (RS-232C) cable unnecessary. If USB is used to connect the touch panel signal, multiple display units (up to eight) can be connected to a single PC to provide a multi-touch-panel configuration for the same screen that can accept input from display units installed at different physical locations.  The panel-mounted model (IPC-DT/61) features an attractive Aluminum face plate and complies with the IP65 standard for dust-tightness and splash-proofing. The panel-mounted units also feature a new panel-mounting mechanism with attachments on the rear of the unit that allow the panel housing to be pushed into place. This makes panel mounting easier by eliminating the need for boss holes which were required on the panel housing on previous models. A stand kit [IPC-SND-03] (sold separately) is also available and enables the display to be used on a desktop.  The embedded model (IPC-DT/65) is an open frame type unit without the Aluminum face plate and is attached from the front using screws (included) or with studs on the panel face. Waterproof packing and a sealing washer are included to enable the display to be installed such that the front of the unit has waterproofing and splash-proofing equivalent to the IP65 standard.

[ IPC-DT/61 and IPC-DT/65 Series Product Range ]  Panel-mounted displays with analog RGB/DVI inputs IPC-DT/61 Series New Models TFT color, 15 inch XGA (1024 x 768 dot) TFT color, 12.1 inch SVGA (800 x 600 dot) TFT color, 10.4 inch VGA (640 x 480 dot) TFT color, 6.5 inch VGA(640 x 480 dot) IPC-DT/H61XT-DC1 IPC-DT/L61SVT-DC1 IPC-DT/M61VT-DC1 IPC-DT/S61VT-DC1  Embedded displays with analog RGB/DVI inputs IPC-DT/65 Series New Models TFT color, 15 inch XGA(1024 x 768 dot) TFT color, 12.1 inch SVGA(800 x 600 dot) TFT color, 10.4 inch VGA(640 x 480 dot) TFT color, 6.5 inch VGA(640 x 480 dot) IPC-DT/H65XT-DC1 IPC-DT/L65SVT-DC1 IPC-DT/M65VT-DC1 IPC-DT/S65VT-DC1

[ Features ] Use of an Aluminum face plate and similar has reduced weight by 26 to 35%.  (Compared to previous CONTEC panel-mounted displays) Full-bright, wide-angle-of-visibility type of liquid crystals capable of displaying up to 262,144 colors  (16,777,216 colors on the IPC-DT/H61XT-DC1 and AC0) Standard analog RGB input for screen. RS-232C and USB interfaces for touch panel. Multiple touch panel configurations containing up to eight touch panels are supported when using the USB touch panel interface. Auto-scaling feature that resizes the input screen to the LCD dot configuration. On-screen display setup menu facilitating screen adjustment Dual-input function supports analog RGB and DVI-D inputs. The display can be connected to two different computers at once.  (Simultaneous display is not supported. Screens are switched using the OSD.) Analog touch panel enabling mouse emulation using driver software Optional AC adapter (IPC-ACAP12-01) available for AC power supply. Front structure with IP65-compliant ingress protection Optional stand kit available for desktop use. A special fitting is provided to prevent the AC adapter cable from being unplugged.

[ Specifications ] Panel-mounted flat panel display with analog RGB/DVI inputs IPC-DT/61 Series Item Specification IPC-DT/S61VT-DC1 IPC-DT/M61VT-DC1 IPC-DT/L61SVT-DC1 IPC-DT/H61XT-DC1 Screen Assembly type Panel mounted, desktop *1 Screen size 6.5 inches 10.4 inches 12.1 inches 15.0 inches Number of pixels 640 x 480 dots 640 x 480 dots 800 x 600 dots 1024 x 768 dots Display type TFT Color LCD Number of colors 262,144 colors 262,144 colors 262,144 colors 16,777,216 colors Screen adjustment Automatic adjustment (display positioning and scaling) and manual adjustment using the front switches Brightness control Adjustment using the front switch or software control from the host computer Backlight control Can be turned on or off by an OSD switch or via software control from the host computer. Display interface Analog RGB input HD-SUB 15 pin (Female) connector DVI-D input 24 pin DVI (Female) connector Incoming signal specification Analog RGB input Separate RGB, analog, positive polarity 0.7Vp-p/75Ω Separate V/H, TTL, positive/negative polarity Horizontal: 31 to 80kHz, vertical: 56 to 75Hz DVI-D input Digital RGB (complies with TMDS) *2 Cable length which recommends 5mm or less *3 Touch panel Resolution 4096 x 4096 Detection method Resistive-layer analog method Touch life expectancy One million repeated touches (silicon rubber load of 3 N) Touch panel interface Connect to the host computer using either USB*4 or RS-232C. USB: USB1.1-compliant, Type B Connector RS-232C: 9pin D-SUB (Male) Connector Touch panel driver (option) For Windows: IPC-SLIB-01 For MS-DOS: IPC-TPB1-DRV Power supply input part Power supply connector 4-pin nylon connector for 12 VDC power supply AC adapter jack AC adapter jack for 12 VDC power supply (An optional AC adapter (IPC-ACAP12-01) can be used for 100 to 240VAC input.) Input power supply voltage +12VDC±5% Consumption current 1.3A(Max.) 1.4A(Max.) 1.6A(Max.) 2.5A(Max.) Consumption current (power save mode) 0.4A(Max.) Environment Operating temperature 0 to 56°C (0oC to 40°C when using an IPC-ACAP12-01 (AC switching adapter)) Storage temperature -10 to 60°C Operating humidity 10% to 90% when using an IPC-ACAP12-01 (AC switching adapter) (No condensation allowed) Operating humidity Normal Corrosive gas None Noise resistance Line noise AC line: 2 kV, Signal line: 1 kV (IEC1000-4-4Level3, EN61000-4-4Level3) (HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01) Electrostatic withstanding voltages Contact: 4 kV(IEC1000-4-2Level2, EN61000-4-2Level2) Airborne: 8 kV(IEC1000-4-2Level3, EN61000-4-2Level3) (HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01) Vibration resistance Sweep durability 10 to 57 Hz/Single-side amplitude or 0.15 mm 57 to 150 Hz/2.0 G in the X/Y/Z directions for 23 minutes each (Conforming to JIS C0040 and IEC68-2-6) Shock resistance 10 G in the X/Y/Z directions for 11 ms; Half-sine wave (Conforming to JIS C0041 and IEC68-2-27) Structure Major dimension (mm) 198(W) x 35(D) x 154(H)(Board depth) 291(W) x 38.5(D) x 226(H)(Board depth) 302(W) x 41.5(D) x 242(H)(Board depth) 359(W) x 41(D) x 284(H)(Board depth) Panel cut dimensions (mm) 199.0(W) x 155.0(H) 292.0(W) x 227.0(H) 303.0(W) x 243.0(H) 360.0(W) x 285.0(H) Mountable panel thickness 1.6mm to 7mm Weight 1.3kg 2.6kg 2.9kg 3.9kg Ingress protection Front part conforming to IP65

*1: Optional desk stand IPC-SND-03 allowing desktop installation *2: If the output is from a CONTEC IPC series or SBC series model, an ISA bus type panel link I/F board (ADPLNK(PC)H) is required for some models. Please confirm before purchasing. *3: Using a cable longer than 5 m may reduce the image quality. The cable should be as short as possible as degradation. in image quality may result even when the cable is 5 m or shorter depending on the type of host computer or cable. *4: The touch panel USB interface is only supported on Windows XP/2000/98SE.

[ Specifications ] Embedded-type flat panel display with analog RGB/DVI inputs IPC-DT/65 Series Item Specification IPC-DT/S65VT-DC1 IPC-DT/M65VT-DC1 IPC-DT/L65SVT-DC1 IPC-DT/H65XT-DC1 Screen Assembly type Integration Screen size 6.5 inches 10.4 inches 12.1 inches 15.0 inches Number of pixels 640 x 480 dots 640 x 480 dots 800 x 600 dots 1024 x 768 dots Display type TFT Color LCD Number of colors 262,144 colors 262,144 colors 262,144 colors 16,777,216 colors Screen adjustment Automatic adjustment (display positioning and scaling) and manual adjustment using the front switches Brightness control Can be turned on or off by an OSD switch or via software control from the host computer. Backlight control Can be turned on or off by an OSD switch or via software control from the host computer. Display interface Analog RGB input HD-SUB 15 pin (Female) connector DVI-D input 24 pin DVI (Female) connector Incoming signal specification Analog RGB input Separate RGB, analog, positive polarity 0.7Vp-p/75Ω Separate V/H, TTL, positive/negative polarity Horizontal: 31 to 80kHz, vertical: 56 to 75Hz DVI-D input Digital RGB (complies with TMDS) *1 Cable length which recommends 5mm or less *2 Touch panel Resolution 4096 x 4096 Detection method Resistive-layer analog method Touch life expectancy One million repeated touches (silicon rubber load of 3 N) Touch panel interface Connect to the host computer using either USB*3 or RS-232C. USB: USB1.1-compliant, Type B Connector RS-232C: 9pin D-SUB (Male) Connector Touch panel driver (option) For Windows: IPC-SLIB-01 , For MS-DOS: IPC-TPB1-DRV Power supply input part Power supply connector 4-pin nylon connector for 12 VDC power supply AC adapter jack AC adapter jack for 12 VDC power supply (An optional AC adapter (IPC-ACAP12-01) can be used for 100 to 240VAC input.) Input power supply voltage +12VDC±5% Consumption current 1.3A(Max.) 1.4A(Max.) 1.6A(Max.) 2.5A(Max.) Consumption current (power save mode) 0.4A(Max.) Environment Operating temperature 0 to 50°C (0oC to 40°C when using an IPC-ACAP12-01 (AC switching adapter)) Storage temperature -10 to 60°C Operating humidity 10% to 90% when using an IPC-ACAP12-01 (AC switching adapter) (No condensation allowed) Operating humidity Normal Corrosive gas None Noise resistance Line noise AC line: 2 kV, Signal line: 1 kV (IEC1000-4-4Level3, EN61000-4-4Level3) (HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01) Electrostatic withstanding voltages Contact: 4 kV(IEC1000-4-2Level2, EN61000-4-2Level2) Airborne: 8 kV(IEC1000-4-2Level3, EN61000-4-2Level3) (HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01) Vibration resistance Sweep durability 10 to 57 Hz/Single-side amplitude or 0.15 mm 57 to 150 Hz/2.0 G in the X/Y/Z directions for 23 minutes each (Conforming to JIS C0040 and IEC68-2-6) Shock resistance 10 G in the X/Y/Z directions for 11 ms; Half-sine wave (Conforming to JIS C0041 and IEC68-2-27) Structure Major dimension (mm)(*Includes attachment fittings) 192(W) x 37.5(D) x 166(H) 292(W) x 43(D) x 234(H) 318(W) x 43(D) x 234(H) 382(W) x 45(D) x 294(H) Panel cut dimensions (mm) 138(W) x 105(H) (Requires eight surrounding M3 stud holes or round φ4 holes) 216(W) x 164(H) (Requires eight surrounding M3 stud holes or round φ4 holes) 252(W) x 190(H) (Requires eight surrounding M3 stud holes or round φ4 holes) 310(W) x 234(H) (Requires eight surrounding M3 stud holes or round φ4 holes) Weight(*Includes attachment fittings) 1.0kg 2.2kg 2.6kg 3.6kg Ingress protection Front part conforming to IP65 (Use the packing supplied.)

*1: If the output is from a CONTEC IPC series or SBC series model, an ISA bus type panel link I/F board (ADPLNK(PC)H) is required for some models. Please confirm before purchasing. *2: Using a cable longer than 5 m may reduce the image quality. The cable should be as short as possible as degradation. in image quality may result even when the cable is 5 m or shorter depending on the type of host computer or cable. *3: The touch panel USB interface is only supported on Windows XP/2000/98SE.

[ Options ] Screen protective sheets IPC-CV15 : 15-inch screen protective sheets (10 sheets) Cable IPC-DVI/D-020 : DVI-D cable (2m) IPC-DVI/D-050 : DVI-D cable (5m) IPC-PLDVI-020 : Panel link - DVI-D conversion cable (2m) IPC-PLDVI-050 : Panel link - DVI-D conversion cable (5m) IPC-CBL3-2 : AT host Touch panel, COM cable (2m) IPC-CBL3-5 : Touch panel, COM cable (5m) Driver IPC-SLIB-01 : Driver & Utility Soft Set (CD-ROM version) IPC-TPB1-DRV : Touch panel driver for MS-DOS (FD) Others IPC-SND-03 : The stands to use the main body on the desk IPC-ACAP12-01 : +12 VDC output AC adapter ( Input: Voltage = 90 to 264V AC, Current =1.3A (Typ.) for input voltage = 100V AC) ( Output: Voltage = 12V DC, Current = 3.5A ) Recommendation Cable (Maker: SANWA SUPPLY INC.) KC-V2 : RGB display cable (2m) KC-V5 : RGB display cable (5m) KU20-2H : USB cable for touch panel (2m) KU20-5H : USB cable for touch panel (5m)

[ Contact ]
U.S.A. (North & South America Sales) CONTEC Microelectronics U.S.A. Inc. 2161 O'Toole Ave., Suite I, San Jose, CA, 95131 TEL: (1)-408-954-7700  FAX: (1)-408-954-7710 E-mail: sales@contecusa.com Web Site: www.contecusa.com PHONE (800)888-8884   Toll Free in the USA	EUROPE CONTEC Microelectronics EUROPE B.V. Binnenweg 4, 2132 CT Hoofddorp, The Netherlands TEL: (31)-23-567-3030  FAX: (31)-23-567-3035 E-mail: sales@conteceu.nl Web Site: www.contec-europe.com
CONTEC GROUPS JAPAN (Headquarters) CONTEC Co., Ltd. 3-9-31, Himesato, Nishi-Yodogawaku, Osaka, 555-0025, TEL: +81-6-477-5219  FAX: +81-6-477-1692 E-mail: intsales@osaka.contec.co.jp Web Site: www.contec.com