| |
|
New Compact PCI-Connected CPU Board
Supporting Pentium 4 Processors
Middle-Size Single-Board Computers for PCI Slot
SPC-8450-LVA
|
|
|
|
CONTEC Co., Ltd., a comprehensive manufacturer of PC peripherals, industrial computers, and network equipment, has developed and commenced sales of a PCI-bus compatible CPU board supporting the Intel® Pentium® 4 and Celeron® processors while incorporating a rich set of peripheral inputs and outputs. The product name is "Middle-size PCI single-board computer" and the model name is "SPC-8450-LVA."
The SPC-8450-LVA is a PCI bus compatible, high-performance CPU board based on the Intel 845GV+ICH4 chipset. It supports the Intel Pentium 4 (up to 2.8 GHz), Celeron D (up to 2.8 GHz), and Celeron processors (up to 2.6 GHz). The main memory can be expanded up to 1 GB by DDR-SDRAM corresponding to PC2100, capable of handling a wide range of increasingly complicated and advanced embedded applications.
While the SPC-8450-LVA is a PCI middle size which is compact (223 (L) x 122 (H) mm), it is designed to be all-in-one with a variety of peripheral resources. The board has assorted extension interfaces such as DVI-I, 100BASE-TX, USB2.0, EIDE, CF Card lot as well as legacy devices such as a serial port (RS-232C/422/485), parallel port, and PS/2 port. The CF Card slot can be connected to the secondary IDE port to enable boot-up from a CF memory card, allowing a system to be configured without a HDD (diskless system).
|
[ Features ]
- PCI bus middle-sized board
- The corresponding CPU is as follows :
Intel(R) Pentium(R) 4 1.7G - 2.8GHz (FSB400/533MHz)
Celeron(R) 1.7G - 2.6GHz(FSB400MHz)
Celeron(R) D 2.26G - 2.8GHz (FSB533MHz)
- DDR SDRAM of up to 1GB can be mounted.
- Equipped with a CF card slot (Type I/II), enabling boot-up from a CF card.
- Equipped with DVI-I I/F, enabling connection with the CONTEC PanelLink type LCD display.
- Provides the AC97 compliant sound function.
|
[ Option ]
CPU
- PCP4-28S: Pentium 4 2.8GHz + Heatsink-fan *1
- PCP4C-20S: Celeron 2.0GHz + Heatsink-fan *1
- PCP4-24: Pentium 4 2.4GHz + Heatsink-fan *2
- PCP4C-20: Celeron 2.0GHz + Heatsink-fan *2
*1: Since a heatsink-fan interferes to board, the next 4 slots can use only a PCI half size board (length of 120mm).
*2: Since a heatsink-fan interferes to board, the next 3 slots can not use for board.
MEMORY
- PC-MDD256-200: 200-Pin SO-DIMM DDR-Memory (PC2100, 256MB)
- PC-MDD512-200: 200-Pin SO-DIMM DDR-Memory(PC2100, 512MB)
- PC-MDD1G-200: 200-Pin SO-DIMM DDR-Memory(PC2100, 1GB)
CABLE
- USB Connector Cable: USB Connector Cable
|
| [ Specifications of SPC-8450-LVA ]
| Type | Specification |
| CPU(Option) | Intel(R) Pentium(R) 4 Processor 1.7G - 2.8GHz(FSB400/533MHz), Intel(R) Celeron(R) Processor 1.7G - 2.6GHz(FSB400MHz) (Only corresponding to the Northwood core), Intel(R) Celeron(R) D Processor 2.26G - 2.8GHz(FSB533MHz)
|
| Cache | Built in CPU |
| Processor socket | Socket 478 |
| Memory(Option) | One SO-DIMM 200-pin socket for PC2100 DDR SDRAM for up to 1GB. |
| Chipset | 845GV Chipset includes GMCH (Graphics and Memory Controller Hub), ICH4 (I/O Controller Hub) and FWH (Firm Ware Hub) |
| BIOS | Award BIOS, PnP support |
| VGA | Built in Intel(R) 845GV, DVI-I connector x 1 |
| Multi I/O | Winbond W83627HF |
| Keyboard / Mouse connector | One PS/2 keyboard/Mouse connector(Bundled the 2 in 1 cable), One box-header 5-pins connector for external keyboard |
| Serial I/F | Two 16550 UART ports, SERIAL1 is RS-232C, SERIAL2 is RS-232C/422/485 configurable, Baud rate: 115.2K - 50bps (programmable), Two box-header 5 x 2-pins connectors |
| Parallel I/F | One high-speed parallel port, support SPP/EPP/ECP mode, One box-header 13 x 2-pins connector |
| On board expansion bus | - |
| LAN Port | 100BASE-TX/10BASE-T, Intel ICH4 integrated controller, One RJ-45 connector |
| IDE I/F | One EIDE port, up to two IDE devices, support Ultra DMA 33/66/100, One box-header 20 x 2-pins connector |
| SATA I/F | - |
| FDD I/F | One FDD port, up to two floppy drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB), One box-header 17 x 2-pins connector |
| VGA / DVI I/F | DVI-I 29-pin (Bundled the DVI-Analog RGB conversion adapter) |
| Compact Flash Slot | One CF card(Type I / II ) slot, Support boot-up from a card |
| SSD Socket | - |
| USB Port | 3ch USB2.0 compliant ports: One USB A Type connector(Front panel), One box-header 5 x 2-pins connector that support 2ch |
| RAID | - |
| Audio | AC97 CODEC., One pin-header 5x2-pins connector for speaker-out, line-in, microphone-in. |
| Watchdog Timer | Software programmable 255 levels (1-255Sec.). Reset occurrence at the time of time up. |
| General-purpose I/F | - |
| Hardware Monitor | Monitoring of the temperature of CPU and board, power supply voltage, and fan speed |
| RTC/CMOS | The coin type Lithium battery specification is shown in table
| Specification | CR2450 |
| Voltage | 3V |
| Capacity | 620mAh |
| Weigh | 6.3g |
* The backup time of the CR2450 battery is over 7 years at 25°C.
* The clock is accurate to +/- 3 minutes/month at 25°C.
|
| Power Management | Power management setup via BIOS Modem Ring On/Wake On LAN Supports PC98/PC99 ACPI Power management |
| Bus specification / Size (mm) | PCI/ 223(L) x 122(H) |
| Power consumption (Max.) | +5VDC±5%, 5.40A +12VDC±5%, 6.20A +5VSB(Stand by) ±5%, 0.65A |
| Operating temperature | 0 - 60°C (Depends on the specification of CPU and heat sink)/ 10 - 90%RH (No condensation) |
| Storage Temperature | -20 - 80°C |
| Floating dust particles | Not to be excessiv |
| Corrosive gases | None |
| Weight | 390g |
| Operating System Support | Windows XP Professional, Windows XP Home Edition, Windows 2000 Professional, Windows 98SE, Windows NT Workstation 4.0 *1 |
*1: USB is not supported.
|
|
| [ Contact ] | U.S.A. (North & South America Sales) CONTEC Microelectronics U.S.A. Inc. 2161 O'Toole Ave., Suite I,
San Jose, CA, 95131 TEL: (1)-408-954-7700 FAX: (1)-408-954-7710
E-mail: sales@contecusa.com Web Site: www.contecusa.com
PHONE (800)888-8884 Toll Free in the USA |
EUROPE CONTEC Microelectronics EUROPE B.V.
Binnenweg 4, 2132 CT Hoofddorp, The Netherlands
TEL: (31)-23-567-3030 FAX: (31)-23-567-3035 E-mail: sales@conteceu.nl
Web Site: www.contec-europe.com
|
CONTEC GROUPS JAPAN (Headquarters)
CONTEC Co., Ltd. 3-9-31, Himesato, Nishi-Yodogawaku, Osaka, 555-0025,
TEL: +81-6-477-5219 FAX: +81-6-477-1692 E-mail: intsales@osaka.contec.co.jp
Web Site: www.contec.com |
|
|
|