|
Tuesday, 15 September 2009 00:00 |
|
Windows 7 Compatibility List (As of September 4, 2009)
Followings are test results with Windows 7 Operating System. CONTEC will continue to announce updated test result with Windows 7.
| Explanatory of the test result |
Yes |
Fully compatible.
|
| XP mode |
Fully compatible with Windows XP compatible mode. |
| Partially |
Major functions are compatible, but some of the rest are incompatible. |
| No |
All or most of the part of functions are incompatible. |
| - |
Not tested
|
Measurement & Control, Communication Device Products
Test & measurement system solution cTEST series
Components
| Product | Driver | 32bit | 64bit | Notes |
| Result | Tested Version | Result | Tested Version |
| Digitaizer with wave form analysis |
| DIG-100M1002-PCI |
API-DIG(WDM) |
Ver. 1.00 |
Yes
|
RC |
Yes
|
RC |
Use INF file for installation instead of driver installer *1 |
PC measurement/control PC-HELPER series
Interface board /PC card/USB module
Please install the latest driver software with following instructions.
1) Download the latest WDM driver from our web site.
2) After decompressing the file, borwse to the INF/WDM// directory.
3) RIGHT CLICK Setup.exe to get the properties window.
4) Select the "Compatibility" tab and then choose the Windows Vista SP2 option.
5) Click Apply and OK.
| Product | Driver | 32bit | 64bit | Notes |
| Result | Tested Version | Result | Tested Version |
| Analog I/O |
PCI Express board
PCI board
PC card |
API-AIO(WDM) |
Ver. 3.61 |
Yes |
RC |
Yes |
RC |
Use INF file for installation instead of driver installer *1 |
| API-AIO(98/PC) |
Ver. 3.64 |
Yes |
RC |
No |
RC |
64bit version is not supported. API-AIO(WDM) is recommended to replace. |
| USB module |
API-USBP(WDM) |
Ver. 3.61 |
Yes |
RC |
No |
RC |
-
|
| Digital I/O |
PCI Express board
PCI board
PC card |
API-DIO(WDM) |
Ver. 3.24 |
Yes |
RC |
Yes |
RC |
Use INF file for installation instead of driver installer *1 |
| API-DIO(98/PC) |
Ver. 6.10 |
Yes |
RC |
No |
RC |
64bit version is not supported. API-DIO(WDM) is recommended to replace. |
| USB module |
API-USBP(WDM) |
Ver. 3.24 |
Yes |
RC |
No |
RC |
-
|
Counter Input
|
PCI Express board
PCI board
PC card |
API-CNT(WDM) |
Ver. 2.33 |
Yes |
RC |
Yes |
RC |
Use INF file for installation instead of driver installer *1 |
| API-CNT(98/PC) |
Ver. 4.51 |
Yes |
RC |
No |
RC |
64bit version is not supported. API-CNT(WDM) is recommended to replace. |
| USB module |
API-USBP(WDM) |
Ver. 2.33 |
Yes |
RC |
No |
RC |
Use INF file for installation instead of driver installer *1 |
| Motion controller |
PCI Express board
PCI board |
API-SMC(WDM) |
Ver. 2.35 |
Yes |
RC |
Yes |
RC |
Use INF file for installation instead of driver installer *1 |
| API-SMC(98/PC) |
Ver. 4.01 |
Yes |
RC |
No |
RC |
64bit version is not supported. API-SMC(WDM) is recommended to replace. |
| Serial Communication |
PCI Express board
PCI board
PC card |
COM Setup Disk |
Ver. 6.24 |
Yes |
RC |
- |
|
PCMCIA(16bit) is not compatible.
|
| USB module |
Ver. 1.10 |
Yes |
RC |
- |
|
XP Mode is not supported. |
| GPIB Communication |
PCI Express board
PCI board
PC card |
API-GPIB(98/PC) |
Ver. 4.70 |
Yes
|
RC |
Yes
|
RC |
Only F series are compatible. |
| API-GPLV(W32) |
Ver. 2.01 |
Yes
|
RC |
Yes
|
RC |
Only F series are compatible. |
| USB module |
API-USBP(WDM) |
Ver. 1.70 |
Yes
|
RC |
No
|
RC |
Use INF file for installation instead of driver installer *1 |
| API-GPIB(98/PC) |
Ver. 4.70 |
Yes
|
RC |
No
|
RC |
-
|
| API-GPLV(W32) |
Ver. 2.01 |
Yes
|
RC |
No
|
RC |
-
|
Support Software
| Product | 32bit | 64bit | Notes |
| Result | Tested Version | Result | Tested Version |
| ActiveX Components |
ACX-PAC(W32) |
Ver. 5.00 |
Partially
|
RC |
-
|
|
An error will occur in sample software. |
| Timer Control Driver |
API-TIMER(WDM) |
Ver. 1.10 |
Yes
|
RC |
Yes
|
RC |
-
|
| API-TIMER(W32) |
Ver. 4.10 |
Yes
|
RC |
No
|
RC |
-
|
| General I/O Driver |
IO-LIB(WDM) |
Ver. 1.10 |
Yes
|
RC |
Yes
|
RC |
-
|
| IO-LIB(W95) |
Ver. 3.12 |
Yes
|
RC |
No
|
RC |
-
|
| IO-LIB(NT) |
Ver. 3.12 |
Yes
|
RC |
No
|
RC |
-
|
| Data Logger software |
C-LOGGER |
Ver. 1.22 |
Yes
|
RC |
No
|
RC |
-
|
Expansion Unit / Bus Adapter
| Product | 32bit | 64bit | Notes |
| Result | Tested Version | Result | Tested Version |
| PCI Express Cabling |
EAD-CE-LPE |
|
-
|
|
-
|
|
-
|
| EAD-CE-EC |
|
-
|
|
-
|
|
-
|
| Bus Extention Type |
EAD-BE-LPE |
|
Yes
|
RTM |
-
|
|
-
|
| EAD(PCI)BE |
|
Yes
|
RTM |
-
|
|
-
|
| EAD(LPCI)BE |
|
Yes
|
RTM |
-
|
|
-
|
| StarFabric-compliant Type |
EAD-SF-LPE |
|
Yes
|
RTM |
-
|
|
-
|
| EAD(LPCI)SF |
|
Yes
|
RTM |
-
|
|
-
|
| EAD(CB)SF |
|
No
|
RTM |
-
|
|
-
|
Distributed Monitoring & Control Network F&eIT series
| Product | Driver | 32bit | 64bit | Notes |
| Result | Tested Version | Result | Tested Version |
| I/O Controller |
| CPU-CA20(FIT)GY |
F&eIT Setup Disk |
Ver. Jan.2009 |
-
|
|
-
|
|
-
|
| CPU-CA10(FIT)GY |
-
|
|
-
|
|
-
|
| I/O Assist Server Unit |
| SVR-IOA2(FIT)GY |
- |
- |
-
|
|
-
|
|
Performs normally due to OS independence. |
| SVR-IOA(FIT)GY |
- |
- |
-
|
|
-
|
|
Performs normally due to OS independence. |
| Monitoring & Control Server Unit |
| SVR-MMF2(FIT) |
- |
- |
-
|
|
-
|
|
Performs normally due to OS independence. |
| Security Server Unit |
| SVR-SEC(FIT)GY |
- |
- |
-
|
|
-
|
|
Performs normally due to OS independence. |
| Media Converter |
| RP-COM(FIT)H |
F&eIT Setup Disk |
Ver. Jan.2009 |
-
|
|
-
|
|
-
|
| RP-COM(FIT)H-AF |
-
|
|
-
|
|
| RP-COM(FIT)GY |
-
|
|
-
|
|
| RP-422(FIT)GY |
-
|
|
-
|
|
| RP-GPIB(FIT)GY |
F&eIT Setup Disk |
Ver. Jan.2009 |
-
|
|
-
|
|
-
|
|
