|
100kS/S 12-bit Analog I/O Board for PCI
AIO-121601M-PCI
February 17. 2009
CONTEC , a leading manufacturer of computer peripheral equipment, industrial computers and network devices, is pleased to announce the release of the AIO-121601M-PCI, its new PCI-based 100kS/S 12-bit analog I/O board.
Hight Resolution Image (702KB)
AIO-121601M-PCI
|
Product Name
|
Function
|
Specifications
|
Model
|
Details
|
|
100kS/S PCI-based
12-bit Analog I/O Board
|
Analog Input
|
16 channels Non-isolated
Resolution:12 bit
Bipolar: ±10V
Conversion Speed:
10μsec［100kS/S/ch］/ch (max)
|
AIO-121601M-PCI
|
More info
Datasheet
|
|
Analog Output
|
1 channel Non-isolated
Resolution:12 bit
Bipolar: ±10V
Conversion Speed:
10μsec［100kS/S］ (max)
|
|
Counter
|
Up/Down Count
Response frequency:10MHz
Non-isolated TTL level
|
|
Digital Input
|
8 channels
Non-isolated TTL level
|
|
Digital Output
|
8 channels
Non-isolated TTL level
|
The PCI-based AIO-12160M-PCI is a multi-functional and high performance 100kS/S 12-bit analog I/O board. This board provides 16 analog inputs, 1 analog output, 2 counterchannels, 8 digital inputs, and 8 digital outputs.
The analog inputs and output feature 256K data buffers that can be used as either FIFO or RING. This feature provides a variety of functions including high speed data collection, analysis and reproduction of data from previous phenomenon or cyclic waveform generation. that the conversion start/stop trigger settings include external TTL, conversion data compare (analog input), count compare match for the counter and count clear, The AIO-121601M-PCI has no onboard trimmer enabling easy calibration of the conversion accuracy via software.
The onboard counters can be operated in either single-phase (Up count) or two-phase (Up-Down count) modes and support rotary encoders and linear-scale position detectors.
The AIO-12160M-PCI is equipped with synchronization control connectors allowing it to be interconnected with other CONTEC products with this connector. This feature enables simultaneous control of operations between installed boards.
CONTEC provides software support for a variety of application development environments. This support includes drivers for Windows® or Linux environments, a VI library for use with National Instrument’s LabVIEW® a daq library for use with The Math Works’ MATLAB® Data Acquisition Toolbox. CONTEC’s data logger software “C-LOGGER” is also included.
Customization of this product is available, please contact our sales offices or distributors.
Features
- Integrates both analog and digital I/O on one board
- Supports SC series signal conditioners
- Analog I/O supports numerous sampling modes
- Counter supports both single-phase and two-phase modes
- Synchronized operation of multiple interface boards Supports CONTEC’s data logger software “C-LOGGER”
- Supports various application development environments
Specifications
|
Analog input
|
|
|
Isolation
|
Non-isolated
|
|
Input type
|
Single-Ended
|
|
Number of input
channels
|
16ch
|
|
Input range
|
Bipolar ±10V
|
|
Absolute maximum input voltage
|
±15V
|
|
Input impedance
|
1MW or more
|
|
Resolution
|
12bit
|
|
Non-Linearity error *1
|
±2LSB
|
|
Conversion speed
|
10μsec [100kS/S/ch] /ch (max)
|
|
Buffer memory
|
256K data FIFO or RING
|
|
Conversion start trigger
|
Software, conversion data compare, external trigger, count compare match for counter, count clear, carry / borrow, timer
|
|
Conversion stop trigger
|
Data save complete, conversion data compare, external trigger, software, count compare match for counter, count clear, digital filter error, abnormal input error, carry / borrow, timer
|
|
External start signal
|
TTL (Rising or falling edge software selectable)
|
|
External stop signal
|
TTL (Rising or falling edge software selectable)
|
|
External clock signal
|
TTL (Rising or falling edge software selectable)
|
|
Analog output
|
|
|
Isolated specification
|
Non-isolated
|
|
Number of output
channels
|
1ch
|
|
Output range
|
Bipolar ±10V
|
|
Absolute maximum input current
|
±5mA
|
|
Output impedance
|
1MW or less
|
|
Resolution
|
12bit
|
|
Non-Linearity error *1
|
±1LSB
|
|
Conversion speed
|
10msec [100kS/S] (max)
|
|
Buffer memory
|
256K data FIFO or RING
|
|
Conversion start trigger
|
Software, external trigger, count compare match for counter, count clear, carry / borrow, timer
|
|
Conversion stop trigger
|
Data save complete, external trigger, software, count compare match for counter, count clear, carry / borrow, timer
|
|
External start signal
|
TTL (Rising or falling edge software selectable)
|
|
External stop signal
|
TTL (Rising or falling edge software selectable)
|
|
External clock signal
|
TTL (Rising or falling edge software selectable)
|
|
Counter
|
|
|
Counter input
|
|
|
Number of channels
|
2 ch
|
|
Counting system
|
Up/down counting
(2-phase/Single-phase/Single-phase Input with Gate Control Attached)
|
|
Max. count
|
FFFFFFFFh (binary data, 32bit)
|
|
Counter input mode
|
Non-isolated TTL level input
|
|
Counter input signal
|
Phase-A/UP 1 x 2 channels
Phase-B/DOWN 1 x 2 channels
Phase-Z/CLR 1 x 2 channels
|
|
Response frequency
|
10MHz
|
|
Digital filter
|
0.1msec - 1.6384msec or not used
(each channel can be independently set by software)
|
|
Timer
|
1msec - 6553msec 1msec units
|
|
Counter start trigger
|
Software/External start input
|
|
Counter stop trigger
|
Software/External stop input
|
|
Control input
|
|
|
Control input signal type
|
Non-isolated TTL level input
|
|
|
Control input channel
|
1 x 2 channels
|
|
|
Control input signal
|
- Preset(Select Rise or Fall)
- Zero-clear(Select Rise or Fall)
- Counter start/stop(Select Rise or Fall)
- General-purpose input(positive logic)
Software-selected (one of four options)
|
|
|
Response time
|
100nsec (max)
|
|
Counter output
|
|
|
Control output signal type
|
Non-isolated TTL level output
|
|
Control output channel
|
1 x 2 channels
|
|
Control output signal
|
- Count match 0 output (one-shot pulse output)
- Count match 1 output (one-shot pulse output)
- Digital filter error output (one-shot pulse output)
- Abnormal input error output (one-shot pulse output)
- General-purpose output (Level output)
Software-selected (one of five options)
(Positive/negative logic software selectable)
|
|
One shot output signal amplitude
|
10msec, 100msec, 1msec, 10msec and 100 msec
(Can be set for each channel, within precision + 1msec)
|
|
Response time
|
100nsec (max)
|
|
Rated output current
|
IOL=24mA (max) IOH= -15mA (max)
|
|
Digital I/O
|
|
|
Type / Number of input channels
|
Non-isolated input / 8ch (TTL level positive logic)
|
|
Type / Number of output channels
|
Non-isolated output / 8ch (TTL level positive logic)
|
|
Common section
|
|
|
I/O address
|
64 ports x 1, 256 ports x 1 region
|
|
Interrupt level
|
Errors and various factors, One interrupt request line as INTA
|
|
Connector
|
96-pin half pitch connector [M(male)type]
PCR-E96LMD+ [HONDA TSUSHIN KOGYO CO., LTD.]
|
|
Power consumption
|
5VDC 680mA (max)
|
|
Operating conditions
|
0 - 50°C, 10 - 90%RH (No condensation)
|
|
PCI bus specification
|
32bit, 33MHz, Universal key shapes supported *2
|
|
Dimensions
|
176.41mm (L) x 105.68mm (H)
|
|
Weight
|
130g
|
*1: A linearity error approximately 0.1% of full-range may occur when operated at 0º or 50ºC ambient temperature.
*2: Board requires +5V power (cannot be used in system that provides only +3.3V power)
CONTEC 's AIO-121601M-PCI lead-free (exceeding JEITA Phase 2 requirements) and RoHS-compliant.
About CONTEC
CONTEC was established in 1975 by Daifuku to create board-level products for its materials handling systems. As CONTEC’s expertise grew so did its product offerings. Today CONTEC offers an expansive product catalogue featuring more than 200 types of board level data acquisition and includes industrially hardened PCs, networking hardware and web-based monitor and control systems.
CONTEC brings three decades of experience in data acquisition and industrial automation to the development and manufacture of automation control systems for today’s demanding automation environments. CONTEC’s design and manufacturing process is meticulously monitored in order to provide highly reliable products and to provide total customer satisfaction.
CONTEC offers products for all aspects of PC-based I/O, available in a wide variety of interconnections including PCI Express, PCI, CardBus and USB. Their F&eIT line of micro-component, Ethernet-based distributed I/O offers effortless interconnection from factory floors to corporate offices. In addition, CONTEC manufactures a full-line of automation specific PCs for both embedded and non-embedded operating systems. |
