Remote monitoring and control - No programming needed

Monitoring & Control Server

n Intelligent and multi-function. All processes can be managed on a web browser.

This intelligent Server Unit is provided with multiple functions including a Web server that can remotely monitor and update I/O information as well as task scripting, logging and e-mail transmission. Simplicity of design enables development and implementation to be easily performed on a web browser.

Monitoring & Control Server

Model Firmware Data sheet Manual JAP ENG CHI SVR-MMF(FIT)GY Ver. 2.20 2.24 885KB 5.8MB 8.5MB -

Power Supplies Optional.

Web Monitoring

WPreloaded with a Web server (Java applet) function, the SVR-MMF (FIT)GY enables monitoring and updating of I/O information from remote sites using a web browser. GUI components (such as graphs, sliders and buttons) and imported image data can be user formatted on the display. All aspects of setup, from screen configuration to linking with the I/O information can be completed using a web browser.

Web Task Script

By combining such tasks as arithmetic operation, conditional branches, data output, e-mail transmission and data logging, execution processes and tasks can be set up much like a flowchart. All steps can be completed using a Web browser.

Wide Range of Supported Devices

= Up to eight device modules can be stacked. = I/O Controllers and I/O Assist Servers can be linked over the network. = Can be linked *1 to PLCs on the network or connected by the RS-232C serial interface. *1  The latest version of the firmware can be downloaded free of charge from CONTEC's Web site. http://www.contec.com/fit/

E-mail transmission (supports file attachment)

The e-mail transmission function allows alarm information or stored files to be sent to the administrator.

PPP Server Dial-up Connection

Maintenance and data transfer can be done over a phone line from an external host by utilizing the PPP server function. The PPP server function allows this unit to access the internet over phone line.

SNMP Agent

Integrated management using CONTEC's SNMPc or other network management software is enabled throught the SNMP Agent.

Configuration Example 1  Device Modules connected with main unit

Configuration Example 2  Coordination with I/O Controller and PLCs

Item		Specifications
CPU		MachZ(ZF Micro Devices)
Memory	L2 Cache	512KByte
	Main	64MByte
Video	Controller	69000 (Chips & Technologies)
	VRAM	2MByte
	CRT Interface	115-pin HD-sub connector 640 x 480/800 x 600 (16,770,000 colors), 1024 x 768 (65,536 colors) 1280 x 1024 (256 colors)
Standard Interface		USB (not supported) x 2, serial x 1, keyboard, mouse, F&eIT Bus
Watchdog Timer Function		2 sec (max.) (reset or output to NMI according to time-up)
Compact Flash Slot		Type I x 1
RTC/CMOS		Lithium cell backup life: 10 years or more (at 25°C) *2 Precision of real-time clock: within error of 3 minutes per month
Power Consumption		5VDC±5%, 1.5A(Max.)
Dimensions (mm)		52.4 (W) x 64.7 (D) x 94.0 (H) (excluding protrusions)
Weight		180g

*2	Please send back the cell for replacement.

Condition			Requirement
Environmental Specs	Operating Temperature		0 to 50°C
	Storage Temperature		-10 to 60°C
	Operating humidity		10 to 90%RH (no condensation)
	Airborne Dust Particles		Must not be excessive.
	Corrosive Gas		Not allowed
	Noise Resistance	Line Noise	AC line/2 kV, signal line/1 kV (IEC1000-4-4Level 3, EN61000-4-4Level 3)
	Ground		D type (former Class 3)

Supported PLCs

MITSUBISHI general-purpose PLCs =MELSEC-Q Series  =MELSEC-A Series  =MELSEC-QnA Series OMRON programmable controllers =SYSMAC-CS Series  =SYSMAC-CJ Series