| Ethernet / USB-based Remote I/O System |
| I/O Controllers |
|
| n Integrated CPU and firmware. Remote I/O easily controlled from your PC |
 This ethernet-based remote I/O system is configured by interconnecting I/O device modules onto an ultra-compact Controller Module. This system can be used in a wide-range of applications and controlled using a PC or in coordination with an F&eIT Server. |
 |
NEW: CPU-CA20(FIT)GY High-speed / advanced-functions
| < 3 times faster than the previous model [CPU-CA10(FIT)GY] |
| |
The CPU-CA20(FIT)GY uses an SH4 240 MHz CPU and supports 100 Mbps (100 BASE-TX) ethernet, ensuring faster I/O and communication processing. Achieves higher speed communication with a response time that is roughly 1/3 (1.5 msec to 0.5 msec)* that of the previous model.
* Variations due to operating environment |
| < Increased number of units can interconnect in same network |
| |
In the standalone startup mode (w/out I/O Assist Server Unit), up to 128 units can be installed on the same network. |
|
Power Supplies Optional.  |
| Fan-less, Compact Design |
| Utilizing a low-heat generating CPU, these fanless I/O Controllers run on minimal power. Their compact design (94 mm x 64.7 mm) requires little installation space. |
| DDE Communication with Excel and SCADA (HMI) Software |
| DDE and SuiteLink server FIT-SVR(W32) (included with controllers) enable communication to be controlled by software that supports DDE client functions such as Microsoft® Excel or Wonderware InTouch®. |
| Computer-based Remote Control |
| The Windows® drivers that are provided enable remote control of the I/O on a networked machine running in a Windows® environment. The I/O can be controlled in a non-Windows environment through the use of the socket functions. |
| Configuration Example 1 Computer-based Control |
| |
 When multiple I/O Controllers are used, it is recommend that you use the I/O Assist Server Unit [SVR-IOA(FIT)GY] gathering information. |
| |
 |
|
| Configuration Example 2 Program-less remote monitoring and control |
| |
A remote monitoring and control system can be design without the aid of a program by using the Monitoring & Control Server Unit [SVR-MMF(FIT)GY]. |
| |
 |
|
| Configuration Example 3 Remote I/O Control via ACTIVE TOUCH® |
| |
 You can use CONTEC's ACTIVE TOUCH®, HMI Programmable Display, as a control terminal for Ethernetbased remote I/O systems. In addition to monitoring the status of permanently installed remote I/O systems, user interface functions can easily be added on. |
|
| Bundled software (CD-ROM) |
| = |
Windows® device module access library
 API-CAP(W32) [CD-ROM] |
| = |
DDE, SuiteLink Server FIT-SVR(W32)
Supported OS: Windows® XP/2000/NT40 (SP5 or later)/Me/98 |
| = |
Utility software
For setting up nodes and updating firmware
Supported OS: Windows® XP/2000/NT40 (SP3 or later)/Me/98
|
| Item |
Specifications |
| CPU-CA20(FIT)GY |
CPU-CA10(FIT)GY |
| CPU |
SH-4 240MHz |
SH-3 60MHz |
| Memory |
Flash ROM: 4Mbyte (32Mbit)
SDRAM: 32Mbyte (256Mbit) |
Flash ROM: 512Kbyte (4Mbit)
EDO DRAM: 2Mbyte (16Mbit) |
| Interface (to host) |
100BASE-TX / 10BASE-T |
10BASE-T (IEEE802.3) |
| Connectable Device Modules |
Max. 8 modules *1 *2 |
| Power Voltage |
5VDC±5% 2-piece power input connector (removable) located on the front
Use of F&eIT Series dedicated power supply or third-party stabilizing power supply is recommended |
| Power Consumption |
0.7A(Max.) |
0.5A(Max.) |
| FG Terminal |
Power input connector is equipped with FG terminal |
Operating Temperature/
Humidity |
0 to 50°C, 10 to 90% RH (no condensation) |
| Dimensions (mm) |
25.2 (w) x 64.7 (d) x 94.0 (h) (1" x 2.54" x 3.7") |
| Weight |
100g (3.52oz) |
| *1 |
The total maximum power consumption by each module can not exceed the rated output current of the power supply unit. |
| *2 |
The stack connector supplies the power to each device module.
Supplied power can not exceed the permissable current of a stack connector (max 3.0A) |
|
| USB-based Controllers also available |
USB-based I/O Controller Module
| Model |
Firmware |
Data
sheet |
Manual |
| JAP |
ENG |
CHI |
CPU-CA10(USB)GY  |
- |
- |
- |
- |
- |
| Use of this module allows a USB connection to configure a host computer controlled remote I/O system. Like the ethernet-based CPUCA10(FIT)GY, there is an extensive range of interconnectable device modules to work with. |
 |
 g Bundled software(CD-ROM)
Windows driver library
API-USBP(WDM)
Windows-standard Win32 API(DLL) format software drivers are included.
These are compatible with CONTEC PCI bus boards and PC cards at the API level |
|