High-precision analog I/O terminal for USB2.0 [ JP-Model : AIO-160802AY-USB ]

Product	:	High-precision analog I/O terminal for USB2.0 [ JP-Model : AIO-160802AY-USB ]
Product Code	:	GAIO-160802AY-USB

It is AIO terminal for USB2.0 where there are an analog voltage signal measurement, the voltage signal output easily by being connected to USB interface of a PC. It is possible for analog input (16bit, 8ch), analog output (16bit, 2ch), digital input (LVTTL 4 points), and digital output (LVTTL 4 points). Making windows application is possible by attached data logger software [C-LOGGER] to data collection non-programing, and Visual Basic or Visual C++ programing by an attached driver library.

Electric Certification Compliancy

;

Environment Compliancy

RoHS Directive;

Function

	Equipped with the analog input (10uSec/ch, 16bit, 8ch), analog output (10uSec, 16bit, 2ch) and digital I/O (4ch each, LVTTL level). All adjustment to analog I/O can be performed by software. Troublesome jumper setup is not required. In addition, It can memorize the adjustment information that is different from adjustment information at the time of factory shipment and can have the adjustment information that accepted use environment.

	Compliant with USB2.0/USB1.1 specifications and capable of a high-speed transfer (480Mbps). Powered by the bus, enabling operation without an external power supply.

	Synchronized with an external signal and capable of starting, stopping the analog I/O.

	Internal buffer memory can be used in FIFO or RING mode (1kWord each for analog input and output).

	Easy-to-wire screw-type connector adopted.

	It be supported with in data logger software [C-LOGGER] that graph indication of collected the signal data, a file save, dynamic transfer to spreadsheetware Excel are possible. * 1: Just after PC start, as for the analog output voltage just after USB port connection, the minimum (-10V) of a setting range is output.

Digital I/O :
Bus : USB;
Function : I/O;
Input : 4;
Output : 4;
Bidirection : -;
Operation voltage : Input: 5VDC-TTL; Input: 3.3VDC-LVTTL; Output: 3.3VDC-LVTTL;
Analog I/O :
Bus : USB;
Function : Input; Output;
Input channel : Single end 8ch;
Output channel : 2ch;
Resolution : 16bit;
Input range : 10V;
Output range : 10V;