Analog I/O | Data Acquisition & Control | Products

Low-cost Analog Output Board for ISA
DA12-8L(PC)

DA12-8L(PC) is a low cost un-insulating type D/A conversion board. Various voltage output ranges can be chosen by software, and a synchronous output is possible after setting up the output data of all eight channels.

Certification

CE

Environmental

Features

  • An output voltage range has the following three sorts, and is chosen by software. ±10V, ±5V, 0 to +10V.
  • High speed D/A conversion. After receiving the D/A start signal, this board takes only 10µsec to settle targetted output voltage for specified channels.
  • Eight voltage output channels.
  • One current output channel of 4 - 20mA.
  • Built-in safety circuit keeps all output level at 0V if power-failure or interrupt will occur.
  • TTL level four digital inputs and four digital outputs for various purpose.

Specification

Analog I/O

Bus
ISA 
Function
Output 
Input channel
 
Input range
 
Output channel
8ch 
Output range
±10V 
Output range
±5V 
Output range
0 -- 10V 
Output range
4 -- 20mA 
Resolution
12bit 
A/D conversion speed
 
D/A conversion speed
10µsec/ch(max.) 

Digital I/O

Bus
ISA 
Function
I/O 
Input
Output
Bidirection
 
Response speed
200nsec(max.) 
Operation voltage
Input: 5VDC-TTL 
Operation voltage
Output: 5VDC-TTL 
Built-in power supply
 
Input circuit
TTL level input (Positive logic)  
Output circuit
TTL level output (Negative logic)  

Page Top

Options

Product CodeProduct
API-AIO(98/PC)Windows version Analog I/O Driver
API-PAC(W32)Driver Library CD-ROM version
DTP-3AScrew Terminal (M3 x 37)
DTP-4AScrew Terminal (M2.6 x 37)
EPD-37Screw Terminal (M3.5 x 37)
EPD-37AScrew Terminal (M3 x 37)
PCA37P-1.537pin D-type(M) to Open-Ended, Flat Cable(1.5m)
PCA37P-337pin D-type(M) to Open-Ended, Flat Cable(3m)
PCA37P-537pin D-type(M) to Open-Ended, Flat Cable(5m)
PCA37PS-0.5PA one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m)
PCA37PS-1.5PA one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m)
PCA37PS-3PA one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m)
PCA37PS-5PA one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m)
PCB37P-1.537pin D-type(M) at Each End, Flat Cable(1.5m)
PCB37P-337pin D-type(M) at Each End, Flat Cable(3m)
PCB37PS-0.5P37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost
PCB37PS-1.5P37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost
PCB37PS-3P37pin D-type(M) at Each End, Shield Cable(3m) Low Cost
PCB37PS-5P37pin D-type(M) at Each End, Shield Cable(5m) Low Cost

Page Top