Products

The PC-HELPER USB-N series | The most suitable for USB-based remote I/O system

 

Features

The Best Module for Embedded System!

The N series is mountable on 35mm DIN rail by itself. They has fixable hook that makes reliable installation on a DIN rail. Also, there are 4 screw holes (fitting for φ3.5) on each edge of a module for ease of mounting. CONTEC is pursuing ease of embedded for equipment. They are powered from USB port (bus powered), so a distribution is unnecessary for the module in an equipment.

Rubber feet and Magnet Accompany the N series for using them on desktop.

Various installations on the floor, wall, ceiling or desktop are possible by magnet and rubber feet.

 

 

Attached USB cable (1.8m) with a cover that features prevent from falling off cable.

Every product in this N series has 1.8m USB cable that is enough length to connect module to computer. Module's side has a connector cover to prevent unplugged cable.

 

Simple Wiring! Screw type terminal connector is Attached.

Attached removable terminal connector on module's side. Only connect electric cables to module and screw the terminal connector with precision flathead screwdriver, and you're done! Any other optional cables and terminal blocks are unnecessity.

※ Strip off approximately 7 mm of the covered part of a wire rod and then insert it to the opening. After the insertion, secure the wire rod with screws. Compatible wires are AWG 28 - 16.

 

LabVIEW-compliant

This N series is compatible with LabVIEW. You can use this series in the same way as a LabVIEW-compliant standard data acquisition VI with a special library VI-DAQ.

Click here for more infomation & free download of VI-DAQ

 

Send You it for FREE!
Contec USB DAQ & Control Products Selection Guide

 

"The PC-HELPER USB-series" is the BEST USB peripheral device for electronic measurement, analysis, testing and communication system.

The latest catalog shows you all of our USB products. Please take full advantage of it to your business !

Click here to Request the free catalog !

Lineup

Analog I/O | Multi-function DAQ

AIO-121602LN-USB500KSPS 16-ch 12-bit Analog Input, 2-ch 12-bit Analog Output,
1-ch 32-bit Counter, 16-ch Digital I/O

NEW AIO-121602LN-USB

 

  • Compatible with a USB1.1/USB2.0. Bus Power
  • Mounting on 35mm DIN rail. Attached screw fastening, and magnet/rubber feet.
  • Adoption of screw terminal connector that enables to achieve easy wiring.
  • 12-bit Analog Input SE:16-ch (DI:8-ch) 2μsec/ch
  • 2-ch 12-bit Analog Output, 1-ch 32-bit Counter , 16-ch Digital I/O
  • Compatible with Windows 7, Vista, XP, Server 2008 and Server 2003
Support Software

 

AIO-120802LN-USB500KSPS 8-ch 12-bit Analog Input, 2-ch 12-bit Analog Output,
1-ch 32-bit Counter, 16-ch Digital I/O

NEW AIO-120802LN-USB

 

  • Compatible with a USB1.1/USB2.0. Bus Power
  • Mounting on 35mm DIN rail. Attached screw fastening, and magnet/rubber feet.
  • Adoption of screw terminal connector that enables to achieve easy wiring.
  • SE:8-ch (DI:4-ch) 12-bit Analog Input (2μsec/ch)
  • 2-ch 12-bit Analog Output, 1-ch 32-bit Counter , 16-ch Digital I/O
  • Compatible with Windows 7, Vista, XP, Server 2008 and Server 2003
Support Software

 

Digital I/O Opto-coupler Isolated Type

Product Photo5 - 50VDC Opto-coupler Isolated I/O 16-ch each

NEW DIO-1616HN-USB

  

  • Compatible with a USB1.1/USB2.0. Bus Power
  • Mounting on 35mm DIN rail. Attached screw fastening, and magnet/rubber feet.
  • Adoption of screw terminal connector that enables to achieve easy wiring.
  • 5 - 50VDC 16-ch opto-coupler isolated input (supporting sink output)
  • 5 - 50VDC 16-ch opto-coupler isolated open-collector output (sink type)
  • Compatible with Windows 7, Vista, XP, Server 2008 and Server 2003
Support Software

 

Digital I/O Relay Output & Opto-coupler Isolated Input Type

Product Photo240VAC/28VDC Relay Output 8-ch (SPDT from c)
12 - 24VDC Opto-coupler Isolated Input 8-ch

NEW DIO-0808RN-USB

  

  • Compatible with a USB1.1/USB2.0. Bus Power
  • Mounting on 35mm DIN rail. Attached screw fastening, and magnet/rubber feet.
  • Adoption of screw terminal connector that enables to achieve easy wiring.
  • 12 - 24VDC 8-ch opto-coupler isolated input (Both of current sink and source outputs supported)
  • 240VAC / 28VDC 8-ch relay output (SPDT from c)
  • Compatible with Windows 7, Vista, XP, Server 2008 and Server 2003
Support Software

 

35mm DIN Rail Mounting & Channels Expandable USB Module Series are Available!

Analog I/O Screw-less Plug Type

Product Photo12bit Isolated Analog Input (Difference input 8-ch)

ADI12-8(USB)GY

  

16bit Isolated Analog Input (Differential input 4-ch)

DAI12-4(USB)GY

  

Pt100 Pt100 Temperature Sensors Input (4-ch)

PTI-4(USB)

  

  • Compatible with a USB1.1/USB2.0. Self-Power (AC adapter included)
  • Mounting on 35mm DIN rail. Attached rubber feet.
  • Screw-less connector plug
  • Isolated by a opto-isolator which improves the noise performance with respect to the PC.
  • Sampling speed is about 600μsec (using 1-ch) to 2msec (using 32-ch). [ ADI12-8(USB)GY ]
  • Conversion speed is 10μsec(voltage) and 20μsec(current) [ DAI12-4(USB)GY ]
  • Provids the avaraging and alrm output functions, and resistance/temperature data acquisition for temperature. Serviceable with either a three-wire or four-wire. [ PTI-4(USB) ]
  • Easy to increase channels using an expansion module (option).
  • Compatible with Windows 7, Vista, XP, Server 2003, 2000, Me and 98
Support Software

 

Analog I/O 16bit Screw Plug Type

Product Photo16bit Isolated Analog Input (Differential Input 4-ch)

ADI16-4(USB)

  

16bit Isolated Analog Output (4-ch)

DAI16-4(USB)

  

  • Compatible with a USB1.1/USB2.0. Self-Power (AC adapter included)
  • Mounting on 35mm DIN rail. Attached rubber feet.
  • Isolated by a digital isolator which improves the noise performance with respect to the PC.
  • Screw-less connector plug
  • Sampling speed is about 200μsec (using 1-ch) to 1msec (using 16-ch). [ ADI16-4(USB) ]
  • Conversion speed is 10μsec(voltag) and 20μsec(current) [ DAI16-4(USB) ]
  • Easy to increase channels using an expansion module (option).
  • Compatible with Windows 7, Vista, XP, Server 2003, 2000, Me and 98
Support Software

 

Digital I/O 16-ch Type

Product PhotoOpto-coupler Isolated Digital I/O 8-ch each

DIO-8/8(USB)GY

  

Opto-coupler Isolated Digital Inpu 16-ch

DI-16(USB)GY

  

Opto-coupler Isolated Digital Output 16-ch

DO-16(USB)GY

  

  • Compatible with a USB1.1/USB2.0. Bus Power
  • Mounting on 35mm DIN rail. Screw-less connector plug
  • Opto-coupler isolated input (supporting sink & sourse output) [ DIO-8/8(USB)GY ] [ DI-16(USB)GY ]
  • Opto-coupler isolated open-collector output (sink type) [ DIO-8/8(USB)GY ] [ DO-16(USB)GY ]
  • Includes "Trigger monitor function" that reports digital input status change (rise and fall) to the computer in a minimum cycle of 1msec. [ DIO-8/8(USB)GY ] [ DI-16(USB)GY ]
  • Easy to increase channels using an expansion module (option).
  • Compatible with Windows 7, Vista, XP, Server 2003, 2000, Me and 98
Support Software

 

Digital I/O 32-ch Type

Product PhotoOpto-coupler Isolated Digital I/O 16-ch each

DIO-16/16(USB)

  

Opto-coupler Isolated Digital Input 32-ch

DI-32(USB)

  

Opto-coupler Isolated Digital Output 32-ch

DO-32(USB)

  

  • Compatible with a USB1.1/USB2.0. Bus Power
  • Mounting on 35mm DIN rail. Screw-less connector plug
  • Opto-coupler input (supporting sink & sourse output) [ DIO-16/16(USB)GY ] [ DI-32(USB)GY ]
  • Opto-coupler isolated open-collector output (sink type) [ DIO-16/16(USB)GY ] [ DO-32(USB)GY ]
  • Includes "Trigger monitor function" that reports digital input status change (rise and fall) to the computer in a minimum cycle of 1msec. [ DIO-16/16(USB)GY ] [ DI-32(USB)GY ]
  • Easy to increase channels using an expansion module (option).
  • Compatible with Windows 7, Vista, XP, Server 2003, 2000, Me and 98
Support Software

 

Counter

Product PhotoIsolated Up-Down Counter Input 2-ch

CNT24-2(USB)GY

  

  • Compatible with a USB1.1/USB2.0. Bus Power
  • Mounting on 35mm DIN rail. Screw-less connector plug
  • 24bit up-down counter 2-ch. Opto-coupler isolated input (supporting current sink output)
  • Supports signle-phase input, 2-phase(A/B/Z) and single-phase input with gate control.
  • Count-match output (The allowable setting range of the output signal width is 0 to 104.5ms.)
  • It is possible to increase channels (up to 3 units) using a device module CNT24-2(FIT)GY.
  • Compatible with Windows Vista, XP, Server 2003, 2000, Me and 98
Support Software

 

Send You it for FREE!
Contec USB DAQ & Control Products Selection Guide

 

"The PC-HELPER USB-series" is the BEST USB peripheral device for electronic measurement, analysis, testing and communication system.

The latest catalog shows you all of our USB products. Please take full advantage of it to your business !

Click here to Request the free catalog !

The PC-HELPER USB-series

 

Page Top