CONTEC VI-DAQ Ver.2.00 : VI Library of data acquisition for LabVIEW

VI Library of data acquisition for LabVIEW
VI-DAQ

What is VI-DAQ?

VI-DAQ is VI library for using our abundant products, analog input and output, digital input and output, and a counter input device ( PCI bus / PC card / USB module). It is for LabVIEW of National Instruments. Various devices can be used easily, without carrying out a complicated setup, since it is created with the function form similar to the "data acquisition VI" of LabVIEW.

It can download from HERE.

The main features

<An intelligible interface
VI-DAQ is created with the function form similar to the "data acquisition VI" of LabVIEW. Since a complicated setup like driver form is unnecessary, the system which used device of our company can create for a short period of time.

<Offer VI function according to the use and the stage.
The function used well is offered for Foundations VI, a special condition setup and etc. as extension VI. The proper use according to the use and the stage is possible for understanding how using by Foundations VI first, and adding Extension VI after that if needed etc.

<Offer the practical sample according to the use
It is preparing many samples of simple and intelligible useing VI.
For example, in the analog input, "an easy input", "use of a trigger", and "a continuation sampling." are prepared. The system development which used VI-DAQ, such as changing only a required configuration and checking actual operation, is supported powerfully.

<The library independent of hardware
In case using different devices, such as a PCI bus board / PC card / USB module, it can be used by the same VI.

<Works at English environment
VI library / help / sample are prepared for English environment.

Composition of VI-DAQ

It can be used only by installing VI-DAQ and a required device driver. Moreover, it can use a new device by upgrade of a driver also.

VI Runtime contained in VI-DAQ absorbs the difference in the device to be used. A PCI bus board and a USB module can create a program using the same VI, without being conscious of the difference, although the device drivers of each hardware differ.

Operating environment

<Correspondence OS
Microsoft Windows XP
Microsoft Windows 2000
Microsoft Windows Me
Microsoft Windows 98 and Second Edition

<LabVIEW correspondence version
National Instruments LabVIEW 6i
National Instruments LabVIEW 6.1
National Instruments LabVIEW 7.0
National Instruments LabVIEW 7.1

Correspondence device (as of September, 2005)
It is possible to use products(it will put on the market in September, 2005 and later too.) by installing the newest driver appended in hardware or downloaded.
( Functions may be unable to be used when it is the device which the specification of API differs)

<Analog I/O device
PCI Bus Exprees Board
AIO-163202F-PE
PCI Bus Board
ADA16-32/2(PCI)F *1, ADA16-8/2(LPCI)L *1, AD16-16(LPCI)L *1, DA16-4(LPCI)L *1,
DA-16-4(LPCI) *1
AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV, AD16-16U(PCI)EV,
AD12-16(PCI)E, AD12-16U(PCI)E, AD12-16U(PCI)EH, AD16-16(PCI)E, AD16-16U(PCI)EH,
ADI12-16(PCI), AD12-16(PCI), AD12-64(PCI), ADI16-4C(PCI), ADI16-4L(PCI),
ADAI16-8/2(LPCI)L, ADI16-16(LPCI)L,
DA16-8(LPCI)L, DA16-16(LPCI)L, DA12-4(PCI), DA12-8(PCI), DA12-16(PCI), DAI16-4C(PCI), DAI16-4(LPCI)L
PC-Card
ADA16-32/2(CB)F *1, ADA16-8/2(CB)L *1, AD12-8(PM)
USB Module
AI-1608AY-USB, ADI12-8(USB)GY, ADI16-4(USB), DAI12-4(USB)GY, DAI16-4(USB)

<Digital I/O device
PCI Exprees Bus Board
DIO-1616T-LPE, DIO-1616L-PE, DIO-3232L-PE, DIO-48D-LPE

PCI Bus Board
PI-32L(PCI), PI-32L(PCI)H, PI-32B(PCI), PI-32B(PCI)H,
PI-64L(PCI), PI-64L(PCI)H, PI-128L(PCI), PI-128L(PCI)H,
PO-32L(PCI), PO-32L(PCI)H, PO-32B(PCI), PO-32B(PCI)H,
PO-64L(PCI), PO-64L(PCI)H, PO-128L(PCI), PO-128L(PCI)H,
PIO-16/16L(PCI), PIO-16/16L(PCI)H, PIO-16/16T(PCI), PIO-16/16TB(PCI),
PIO-16/16B(PCI), PIO-16/16B(PCI)H, PIO-32/32B(PCI)H, PIO-32/32B(PCI)V, PIO-32/32L(PCI), PIO-32/32L(PCI)H,
PIO-32/32T(PCI), PIO-32/32T(PCI)H, PIO-32/32F(PCI), PIO-64/64L(PCI), PIO-16/16L(LPCI)H, PIO-16/16B(LPCI)H,
PIO-16/16T(LPCI)H, PIO-16/16H(PCI)H, PIO-32/32H(PCI)H, PIO-16/16RL(PCI)H, PIO-32/32RL(PCI)H,
PIO-16/16RY(PCI), PIO-48D(PCI), PIO-48D(LPCI)H, PIO-64/64L(PCI)H,
RRY-16C(PCI), RRY-16C(PCI)H, RRY-32(PCI), RRY-32(PCI)H
PC-Card
PIO-16/16L(CB)H, PIO-48D(CB)H, PIO-24W(PM), PIO-32D(PM), PIO-16/16L(PM)

USB Module
DIO-0808LY-USB, DIO-24DY-USB, DI-16(USB)GY, DI-32(USB), DO-16(USB)GY, DO-32(USB),
DIO-8/8(USB)GY, DIO-16/16(USB)
CompactPCI Bus Board
PI-64L(CPCI), PO-64L(CPCI), PIO-32/32L(CPCI)

<Counter input device
PCI Bus Board
CNT24-4(PCI), CNT24-4(PCI)H, CNT24-4D(PCI), CNT24-4D(PCI)H
USB Module
CNT24-2(USB)GY

*1: The in range out range function and event controllership function of the counter ability of F series, bus master transmission (an analog input, output), and an analog input are not supported. The counter ability of L series is not supporting. The synchronization with a board cannot be performed except that ADA16-32/2(PCI)F used the synchronous connector.

*About our GPIB communication device, please use API-GPLV(W32) GPIB Driver for LabVIEW
with the GPIB device library of LabVIEW without modification.

Return to TOP

The main features
<An intelligible interface VI-DAQ is created with the function form similar to the "data acquisition VI" of LabVIEW. Since a complicated setup like driver form is unnecessary, the system which used device of our company can create for a short period of time. <Offer VI function according to the use and the stage. The function used well is offered for Foundations VI, a special condition setup and etc. as extension VI. The proper use according to the use and the stage is possible for understanding how using by Foundations VI first, and adding Extension VI after that if needed etc. <Offer the practical sample according to the use It is preparing many samples of simple and intelligible useing VI. For example, in the analog input, "an easy input", "use of a trigger", and "a continuation sampling." are prepared. The system development which used VI-DAQ, such as changing only a required configuration and checking actual operation, is supported powerfully. <The library independent of hardware In case using different devices, such as a PCI bus board / PC card / USB module, it can be used by the same VI. <Works at English environment VI library / help / sample are prepared for English environment.

Composition of VI-DAQ
It can be used only by installing VI-DAQ and a required device driver. Moreover, it can use a new device by upgrade of a driver also. VI Runtime contained in VI-DAQ absorbs the difference in the device to be used. A PCI bus board and a USB module can create a program using the same VI, without being conscious of the difference, although the device drivers of each hardware differ.