=====================================================================
=     CPI series CODESYS package for CPI-PS10CM4-2E021              =
=                                                      Ver1.0.0.0   =
=                                                  CONTEC Co.,Ltd.  =
=====================================================================

�� Table of contents
====================
  Introduction
  About compatible product models
  About archive files
  CODESYS operation confirmed version
  Folder structure
  Installation procedure
  Version upgrade history


�� Introduction
===============
  Thank you for your continued patronage of CONTEC products.

  This file describes the contents of the CODESYS package archive file
  (hereafter referred to as the archive file) used with CPI-PS10CM4-2E021.
  Please refer to it together with the reference manual.

�� About compatible product models
==================================
  CPI-PS10CM4-2E021
  CPI-DIO-0808L
  CPI-DIO-0808RL
  CPI-DO-16L
  CPI-DO-16RL
  CPI-DI-16L
  CPI-RRY-16
  CPI-AI-1208LI
  CPI-AO-1602LC
  CPI-CNT-3201I

�� About archive files
======================
  This archive file contains the files
  necessary to install the CODESYS development environment.

�� CODESYS operation confirmed version
======================================
  This archive file has been confirmed to work with the following versions.
  CODESYS Development System V3 3.5.19.70

�� Folder structure
===================
  By copying the archive file to an appropriate folder and unzipping it,
  the following folder structure will be created.

    \
      +-- CONTEC CPI Series.package         CODESYS Package (Ver1.0.0.0)
      +-- contec-cpi-codesys_1.0-1_all.deb  CODESYS package for CPI-RAS control (Ver1.0)

�� Installation procedure
=========================

  �yInstalling CODESYS�z
  1.Access the CODESYS Store using a web browser and download the CODESYS development environment.
    CODESYS is updated from time to time, so be sure to download the latest version.
    URL: https://store.codesys.com/
  2.After clicking the [Download] button, the "Login or Create an Account" screen will be displayed.
    If you have a CODESYS Store account, enter your "Email Address" and "Password" in "Registered Customers" and click the "Sing In" button.
    If you are a new user, register as a user and then log in.
  3.Enter your "Email Address" and "Password" to log in to the Download Center.
    After logging in, click [Download] to start the download.
  4.Unzip the downloaded file and run the setup file (file with the extension .exe) to install CODESYS.
  
  �yInstalling the CODESYS package for Raspberry Pi�z
  To use this product with CODESYS, you must install the CODESYS package for Raspberry Pi.
  1.Run CODESYS.
  2.From the [Tools] menu, select [CODESYS Installer...].
  3.Select "CODESYS Control for Raspberry Pi" from the [Browse] tab under [Add-ons] and install.

  �yInstalling the CODESYS package for the CPI series�z
  1.Run CODESYS and select [CODESYS Installer...] from the [Tools] menu.
  2.Click [Install File] and specify the CODESYS package file.
  
  �yInstalling the CODESYS package for CPI-RAS control�z
  1.Run CODESYS and select [Update Raspberry Pi] from the [Tools] menu.
  2.Click [Install...] from [Additional Packages] on the [Raspberry Pi] tab
    and specify the CODESYS package file for CPI-RAS control.

�� Version upgrading history
=======================

Ver1.0.0.0 (2024/09/26)
--------------------------------
  First release
  CODESYS package for CPI-RAS control (Ver1.0)