================================================================================ Gateway Series Ethernet to Sub-GHz Wireless Firmware for GW1-ETH-WQ-xx ================================================================================ ------------------------------------------------------------------------------- Released by CONTEC CO., LTD. Distribution conditions Firmware can be redistributed freely unless it involves profit-oriented actions to the owner of the product. Version c920_gw_type2.bin ver.1.20.00 (2020-07-01) ------------------------------------------------------------------------------- ================================================================================ To begin with ================================================================================ The expanded folder contains the following files. - c920_gw_type2.bin ... Firmware - Release notes (This document) ================================================================================ Supported models ================================================================================ The provided firmware (c920_gw_type2.bin) supports the models listed below. It cannot be used with other models. - GW1-ETH-WQ-US - GW1-ETH-WQ-EU - GW1-ETH-WQ-CN ================================================================================ Note ================================================================================ The CONTEC Device Utility is required separately for updating the firmware. For details on each function, refer to the CONTEC Device Utility Help. ================================================================================ Version Upgrading History ================================================================================ -------------------------------------------------------------------------------- Firmware Version 1.20.00 (2020-07-01) -------------------------------------------------------------------------------- [ Version 1.01.00 -> 1.20.00 ] *** Added the following functions *** - Supports the counter function of DIO-0404LY-WQ-xx. - Added status information that can be acquired by CONTEC Device Utility. - Added Modbus TCP register map. - Added a time setting before disconnecting a terminal that is not accessed for a certain period of time. -------------------------------------------------------------------------------- Firmware Version 1.01.00 (2019-03-11) -------------------------------------------------------------------------------- [ Version 1.00.00 -> 1.01.00 ] *** Added the following functions *** - Supports GW1-ETH-WQ-CN for China. *** Problem fix *** - Fixed an issue that caused a rare start error under radio wave environment where radio communication load is high. -------------------------------------------------------------------------------- Firmware Version 1.00.00 (2018-06-26) -------------------------------------------------------------------------------- First release version ================================================================================ Use of our software ================================================================================ Be certain to read the following Software license agreement carefully and continue to use the firmware only if you agree to the terms. -------------------------------------------------------------------------------- Software license agreement -------------------------------------------------------------------------------- PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (the "Agreement") CAREFULLY BEFORE USING CONTEC'S SOFTWARE. THIS AGREEMENT SET FORTH TERMS AND CONDITIONS REGARDING THE LICENSE TO USE CONTEC'S SOFTWARE ONTO WHICH THE AGREEMENT IS ATTACHED (the "Software"). BY DOWNLOADING, INSTALLING OR USING THE SOFTWARE OR USING MACHINEARY ONTO WHICH THE SOFTWARE HAS BEEN INSTALLED, CUSTOMERS ARE AGREEING TO BE BOUND BY THE AGREEMENT. CUSTOMERS MAY NOT DOWNLOAD, INSTALL OR USE THE SOFTWARE OR ANY MACHINERY ONTO WHICH THE SOFTWARE HAS BEEN INSTALLED WITHOUT AGREEING TO THE AGREEMENT. Article 1. Intellectual Property Rights The copyright, patent right or any other intellectual property right pertaining to the Software or any documentary attachments, such as manuals, as well as any copies thereof (the "Software and the Like") shall belong to CONTEC, and customers shall have no rights therefor other than those expressly authorized herein. Article 2. Permitted License 1. CONTEC grants customers a non-exclusive right to install and use, free of charge, the Software solely for the purpose of using hardware products onto which the Software has been installed. 2. Customers may copy the Software for a minimum number of times as necessary solely for emergency backup purposes in using the Software. However, description regarding any of the rights pertaining to the Software supplied by CONTEC shall be attached to any such copies. 3. Customers may incorporate software provided by CONTEC as a library onto software created by the customer. Article 3. Restrictions on Use Customers shall not: (1) Create any derivative software from the Software other than as set forth herein; (2) Copy the Software other than as set forth therein; (3) Modify, adapt, decompile, disassemble or reverse-engineer the Software; or (4) Delete or alter the representation or trademark of the rights of the Software. Article 4. Limited Liabilities 1. CONTEC HEREBY DISCLAIMS ANY WARRANTY WITH RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE AND/OR NON-INFRINGEMENT OF THIRD PARTY RIGHTS. 2. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL CONTEC BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR USE OR INABILITY TO USE THE SOFTWARE AND THE LIKE. Article 5. Transfer 1. Customers may transfer their rights authorized them with respect to the Software and in accordance herein to a third party only when the customer satisfies all of the following conditions: (1) The customer transfers the Agreement and the Software and the Like to such third party; (2) The customer transfers to such third party all CONTEC hardware products onto which the Software has been downloaded; and (3) The recipient of the transfer agrees to the terms and conditions herein. Article 6. Termination 1. CONTEC may terminate the Agreement with immediate effect without any notice or demand to the customer if the customer fails to comply with any of the provisions herein. 2. Upon the termination of the Agreement, the customer's license shall cease to be effective. The customer shall immediately discontinue using the Software in any way, and shall uninstall and destruct any reproduction of the Software. Article 7. Export Control 1. Customers shall comply with the Foreign Exchange and Foreign Trade Act of Japan, the U.S. Export Administration Regulation and the laws and regulations of any other country when taking the Software and the Like outside Japan. 2. Customers shall not transfer, export or re-export the Software and the Like to any individual or entity that is likely to use the Software and the Like to design, develop or manufacture nuclear weapons, biochemical weapons, or to design, develop or manufacture missiles. 3. Customers shall not transfer, export or re-export the Software and the Like to any individuals or entities set forth in the following countries or regions: (1) The Republic of Cuba, The Islamic Republic of Iran, the Republic of Iraq, the Great Socialist People's Libyan Arab Jamahiriya or North Korea; (2) Any individuals or entities on the "List of Foreign Users" based on the Import Trade Control Order or the U.S. Department of Commerce Denied Person's List or Entity List; or (3) Any country, region, individual or entity designated by the government of Japan, the U.S. or any other relevant country. Article 8. Governing Law The provisions herein shall be construed and governed in accordance with the laws of Japan. This Agreement shall not be governed by the United Nations Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded. Article 9. Dispute Resolution Upon the occurrence of any dispute in relation to the Agreement or the Software, if any legal procedures are required, such as the filing of a petition for a lawsuit, the Osaka District Court shall have the exclusive jurisdiction over such dispute. Article 10. Severability If for any reason any portion of the provisions set forth herein is found to be invalid or unenforceable, the remainder of the Agreement shall not be affected in any way and shall be valid and enforceable to the extent permitted by law. ----[ CAUTION ]----------------------------------------------------------------- - The contents in this document are subject to change without notice. - The names of company and product referred to in this document are generally trademarks or registered trademarks. - No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. --------------------------------------------------------------------------------