=====================================================================
= Windows Driver for Analog I/O Driver =
= API-AIO(WDM) Ver.8.01 =
= CONTEC Co., Ltd. =
=====================================================================
- Contents
==========
Introduction
Notes
Installation
The history of version-up
- Introduction
==============
Thank you for purchasing this product.
The following description is a supplementary explanation for API-AIO(WDM).
Please refer to Online Help(APITOOL.CHM) for how to use API-AIO(WDM).
- Notes
=======
In the following cases, the maximum size of the buffer for bus master is limited.
In Windows 64 bit OS and Windows 32 bit OS, PAE (Physical Address Extension) is enabled.
In Windows 64 bit OS or Windows 32 bit OS, PAE (Physical Address Extension) is enabled,
and [Memory Reclaiming] functionality is enabled by BIOS setting of the PC (matherboard)
in which a board is plugged.
* According to PC (motherboard), there is the case that [Memory Reclaiming] functionality
cannot be changed to Enabled/Disabled by BIOS setting, therefore, please confirm in advance.
* Up to 2 Mbyte for Windows 10 Version 1703 and later, up to 1 Mbyte for earlier OS.
The target device
AIO-163202F-PE, ADA16-32/2(PCI)F, AI-1204Z-PCI
- Installation
==============
For the installation procedure of the device driver and the development environment (sample programs, etc.),
refer to the following help file after extracting the download file.
Help\ENG\APITOOL.chm
- The history of version-up
===========================
* Series device list
F-Series: ADA16-32/2(PCI)F, AIO-163202F-PE
L-Series: ADA16-8/2(LPCI)L,
AD16-64(LPCI)LA, AD16-16(LPCI)L,
DA16-16(LPCI)L, DA16-8(LPCI)L, DA16-4(LPCI)L
ADAI16-8/2(LPCI)L, ADI16-16(LPCI)L, DAI16-4(LPCI)L
AIO-160802L-LPE, AI-1616L-LPE, AO-1604L-LPE
AIO-121602AH-PCI, AIO-121602AL-PCI
AI-1216AH-PCI, AI-1216AL-PCI
AIO-160802LI-PE, AI-1616LI-PE
AO-1604LI-PE, AI-1664LA-LPE
AO-1608L-LPE, AO-1616L-LPE
E-Series: AD12-16(PCI)E, AD12-16U(PCI)E, AD12-16U(PCI)EH
AD16-16(PCI)E, AD16-16U(PCI)EH, ADI12-16(PCI), AI-1216I2-PCI
AD12-16(PCI)EV, AD12-16U(PCI)EV,
AD16-16(PCI)EV, AD16-16U(PCI)EV
AIO-121601E3-PE, AIO-121601UE3-PE
AIO-161601E3-PE, AIO-161601UE3-PE
AD12-16(PCI), AD12-64(PCI)
AI-1604CI2-PCI, AO-1604CI3-PCI, AO-1604CI2-PCI
DA12-4(PCI), DA12-8(PCI), DA12-16(PCI)
B-Series: AI-1216B-RB1-PCI, AI-1216B-RU1-PCI
Z-Series: AI-1204Z-PCI, AI-1204Z-PE
G-Series: AIO-163202UG-PCI, AIO-163202G-PE
AIO-123202UG-PCI, AIO-123202G-PE
AIO-1664UG-PE
USB-Series: ADI12-8(USB), ADI16-4(USB), DAI12-4(USB), DAI16-4(USB)
N-Series: AIO-121602LN-USB, AIO-120802LN-USB, AI-1608VIN-USB, AI-1608AIN-USB,
AO-1604VIN-USB, AO-1604AIN-USB
X-Series: AIO-163202FX-USB, AO-1604LX-USB, AI-1664LAX-USB
Y-Series: AI-1608AY-USB, AI-1608GY-USB, AIO-160802AY-USB, AIO-160802GY-USB
Wireless I/O-Series: AI-1004LY-WQ, AI-1004LY-WQ-EU, AI-1004LY-WQ-US, AI-1004LY-WQ-CN
CONPROSYS nano-Series: CPSN-AI-1208LI, CPSN-AI-2408LI, CPSN-AO-1602LC
CONPROSYS-Series: CPS-AI-1608LI, CPS-AI-1608ALI, CPS-AO-1604LI, CPS-AO-1604VLI
Ver.8.00 -> 8.01 (Web Release 2023.06)
----------------------------------------
- Fixed a bug that [The specified number of data are stored] status may not turn ON.
Target device: AI-1204Z-PCI
- Fixed a bug that the [Event that device operation end] may occur twice when executing the AioStopAo function with F-Series devices.
Ver.7.91 -> 8.00 (Web Release 2023.06)
----------------------------------------
- Add support device
Support device: AI-1664UG-PE
- Fixed a bug that the value of AioGetAiStopTriggerCount function could not be obtained correctly when delay sampling was set.
Target device: AIO-163202UG-PE
AIO-163202G-PE
AIO-123202UG-PE
AIO-123202G-PE
- Fixed a bug that BSoD may occur when recognizing or removing the device
Target device: AIO-163202UG-PE
AIO-163202G-PE
AIO-123202UG-PE
AIO-123202G-PE
AI-1204Z-PE
Ver.7.90 -> 7.91 (Web Release 2023.05)
----------------------------------------
- Fixed a bug that the event was notified even when [Event that DA conversion start condition is satisfied] was specified as the event factor, and [Software Start] was specified as the start condition.
Target device: F-Series
L-Series
Ver.7.80 -> 7.90 (Web Release 2023.04)
----------------------------------------
- Add support device
Support device: AIO-163202G-PE
AIO-163202UG-PE
AIO-123202G-PE
AIO-123202UG-PE
- Add new function
New function: AioSetAiTransferSize
AioGetAiTransferSize
AioSetAoTransferSize
AioGetAoTransferSize
Ver.7.70 -> 7.80 (Web Release 2022.12)
----------------------------------------
- Checked the operation on Windows 10 22H2
- Fixed the VB.NET and C# header files (Caio.vb, CaioCs.cs) because the values were not passed normally when calling the following functions.
Target functions: AioSetAiEvent
AioGetAiEvent
AioSetAoEvent
AioGetAoEvent
AioSetCntEvent
AioGetCntEvent
AioSetTmEvent
AioGetTmEvent
- Fixed the following bugs.
Phenomenon: The Evnet that DA conversion start may occur multiple times.
Evnet that the specified number of data are output may not occur
Target device: AIO-121602LN-USB
AIO-120802LN-USB
AO-1604LX-USB
AIO-160802AY-USB
AIO-160802GY-USB
Ver.7.60 -> 7.70 (Web Release 2022.11)
----------------------------------------
- Add support development language
Support language: Python 3.11
- Checked the operation on Windows 11 22H2
- Add a python sample
Add sample: Digital input and output
Ver.7.51 -> 7.60 (Web Release 2022.09)
----------------------------------------
- Add support development language
Support language: Microsoft Visual Basic .NET 2022
Microsoft Visual C# 2022
Microsoft Visual C++ (MFC) 2022
- End of support for the following development languages
Microsoft Visual Basic .NET 2010,2012,2013
Microsoft Visual C# 2010,2012,2013
Microsoft Visual C++ (MFC) 2010,2012,2013
- The sample program has been redesigned with an emphasis on versatility and improved usability.
- Fixed a bug that the "Event that device operation end" may not occur with F-Series devices.
- Fixed a bug that an error may occur when executing the following functions with F-Series devices.
Target functions: AioGetAiStartLevelEx
AioGetAiStartInRangeEx
AioGetAiStartOutRangeEx
AioGetAiStopLevelEx
AioGetAiStopInRangeEx
AioGetAiStopOutRangeEx
Ver.7.50 -> 7.51 (Web Release 2022.07)
----------------------------------------
- Fixed a bug that no error code is returned when the following function is executed with the USB cable disconnected when using a USB device.
Target function: AioSingleAo
AioSingleAoEx
AioMultiAo
AioMultiAoEx
Ver.7.41 -> 7.50 (Web Release 2022.03)
----------------------------------------
- Support C-Logger Ver.1.50.
Ver.7.40 -> 7.41 (Web Release 2022.02)
----------------------------------------
- Fixed a bug that the return value may be undefined when executing function AioGetAiSamplingDataEx from a 32 bit application on 64-bit OS.
Target device: AI-1204Z-PE
- Fixed a bug that the setting was not reflected normally in the function AioSetDiFilter.
Target device: AI-1608VIN-USB
AI-1608AIN-USB
AO-1604VIN-USB
AO-1604AIN-USB
Ver.7.30 -> 7.40 (Web Release 2022.01)
----------------------------------------
- Add support development language
Support language: Python 3.10
- Checked the operation on Windows 10 21H2
- Add support OS
Support OS: Microsoft Windows 10 IoT Enterprise LTSC 2021
- Fixed a bug that blue screen will occur when executing function AioGetAiSamplingDataEx from a 32 bit application on 64 bit OS.
Target device: AI-1204Z-PE
Ver.7.21 -> 7.30 (Web Release 2021.12)
----------------------------------------
- Add support OS
Support OS: Microsoft Windows 11 (64bit)
Ver.7.20 -> 7.21 (Web Release 2021.09)
----------------------------------------
- Added a configurable combination of synchronous bus slave signals in the AioSetEcuSignal function.
Target device: AI-1204Z-PE
AI-1204Z-PCI
Ver.7.12 -> 7.20 (Web Release 2021.06)
----------------------------------------
- Checked the operation on the following OS
Target OS: Microsoft Windows 10 21H1
Microsoft Windows 10 IoT Enterprise 2019 LTSC
Microsoft Windows 10 IoT Enterprise LTSB 2016
- Fixed a bug that function processing may not be completed when the following products are operated in multithread.
Target device: GW1-ETH-WQ
GW1-ETH-WQ-EU
GW1-ETH-WQ-US
GW1-ETH-WQ-CN
CPSN-MCB271-S1-041
CPSN-MCB271-1-041
Ver.7.11 -> 7.12 (Web Release 2021.05)
----------------------------------------
- Fixed a bug that the process may not be completed when AioStartAo is executed after executing AioStopAo.
Ver.7.10 -> 7.11 (Web Release 2021.05)
----------------------------------------
- Fixed a bug that the output value becomes abnormal when simple input is performed during continuous output with AIO-163202FX-USB.
Ver.7.01 -> 7.10 (Web Release 2021.04)
----------------------------------------
- Add support development language
Support language: Python 3.9
- Fixed the following bugs that occurred in AI-1204Z-PE
. In the user buffer mode and [Not overwrite the memory] setting, some sampling data is overwritten when an overflow occurs.
. In the device buffer mode and FIFO mode setting, sampling with a specific memory size does not stop even if an overflow occurs.
. Internal parameters return to the default, when AioInit function is executed in another process during multi-process.
. Sampling stops when AioExit function is executed in another process during multi-process.
Ver.7.00 -> 7.01 (Web Release 2021.03)
----------------------------------------
- Fixed a bug that the calibration program could not calibrate correctly
Analog input function target device: AIO-121602LN-USB
AIO-120802LN-USB
AIO-121602AH-PCI
AI-1216AH-PCI
AIO-121602AL-PCI
AIO-1216AH-PCI
AIO-1204Z-PCI
Analog output function target device: All devices
- Fixed a bug that the calibration program could not be started
Target device: AI-1616LI-PE
AO-1604LI-PE
- Fixed a bug that settings other than CH0 could not be confirmed in the calibration program.
Target device: AI-1204Z-PE
Ver.6.80 -> 7.00 (Web Release 2021.02)
----------------------------------------
- Add support controller
Support controller: CC-USB271-CPSN4
- Revise the support OS
Support OS: Microsoft Windows 10 (32bit/64bit)
- End of support for the following devices
ADA16-32/2(CB)F, ADA16-8/2(CB)L
Ver.6.70 -> 6.80 (Web Release 2020.12)
----------------------------------------
- Checked the operation on Windows 10 20H2.
- Supported Windows 10 security policy (memory integrity).
- Fixed a bug that data could not be acquired normally when AioSingleAiEx was executed with CPSN-AI-1208LI + CPSN-MCB271-xxx.
- Fixed the following bugs that occurred in AI-1204Z-PE
. "20001" error occurs when executing AioSetAiRangeAll.
. It may take some time to stop conversion after the conversion stop condition is satisfied.
. Device information revision is not displayed properly in diagnosis report.
. When sampling is performed with the device buffer mode and memory format set to FIFO, sampling stops when the total sampling times exceeds the set buffer size.
Ver.6.60 -> 6.70 (Web Release 2020.11)
----------------------------------------
- Add support device
CPSN-AO-1602LC
Ver.6.50 -> 6.60 (Web Release 2020.09)
----------------------------------------
- Add support development language
Support language: Python 3.8
- Fixed a bug that the maximum number of samplings could not be set with AioSetAiStopTimes on AI-1204Z-PE.
Ver.6.41 -> 6.50 (Web Release 2020.07)
----------------------------------------
- Checked the operation on Windows 10 2004.
Ver.6.40 -> 6.41 (Web Release 2020.07)
----------------------------------------
- Fixed a bug that a blue screen may produce when try sampling more than buffer size set in AI-1204Z-PE.
Ver.6.30 -> 6.40 (Web Release 2020.06)
----------------------------------------
- Supports new devices
AI-1204Z-PE
Ver.6.20 -> 6.30 (Web Release 2020.04)
----------------------------------------
- Integrate the USB driver
- Revise the support OS
Support OS: Microsoft Windows 10 (32bit/64bit)
Microsoft Windows 8.1 (32bit/64bit)
Microsoft Windows 7 (32bit/64bit)
- Revise the support development language
Support language: Microsoft Visual Basic .NET (2010,2012,2013,2015,2017,2019)
Microsoft Visual C# (2010,2012,2013,2015,2017,2019)
Microsoft Visual C++ (MFC) (2010,2012,2013,2015,2017,2019)
- End of support for the following devices
CPU-CA10(USB), AIO-121601M-PCI
Ver.6.13 -> 6.20 (Web Release 2020.03)
----------------------------------------
- Supports new devices
CPSN-AI-2408LI
Ver.6.12 -> 6.13 (Web Release 2020.02)
----------------------------------------
- Fixed an issue that sampling may not be performed properly even if AioStartAi is executed.
Target function: AI-1608VIN-USB
AI-1608AIN-USB
Ver.6.11 -> 6.12 (Web Release 2020.01)
----------------------------------------
- Fixed an issue that a blue screen may occur when performing continuous output by changing the number of channels used.
Target function: AO-1608L-PE
AO-1616L-LPE
DA16-08(LPCI)L
DA16-16(LPCI)L
Ver.6.10 -> 6.11 (Web Release 2020.01)
----------------------------------------
- Fixed an issue that data may not be measured with AIO-163202FX-USB.
Target function: AioMultiAi
AioMultiAiEx
Ver.6.03 -> 6.10 (Web Release 2019.12)
----------------------------------------
- Checked the operation on Windows 10 19H2.
Ver.6.02 -> 6.03
----------------------------------------
- Fixed an issue that the application may not terminate normally.
Ver.6.01 -> 6.02
----------------------------------------
- Fixed the following issues that occur when RING memory is set with AI-1608VIN-USB and AI-1608AIN-USB
. When sampling by looping the driver memory, some data may not be obtained
. Memory is reset when AioStartAi is executed
Ver.6.00 -> 6.01
----------------------------------------
- Fixed the following issues with AO-1604VIN-USB and AO-1604AIN-USB
. Output may become abnormal when using the repeat function
. When the start condition or stop condition is set to external trigger, a value other than 1 can be set into AioSetAoRepeatTimes.
Ver.5.90 -> 6.00 (Web Release 2019.09)
----------------------------------------
- Add support development language
Support language: Microsoft Visual Basic 2019
Microsoft Visual C# 2019
Microsoft Visual C++ 2019
Ver.5.80 -> 5.90 (Web Release 2019.08)
----------------------------------------
- Add support device
Support device: AI-1216I2-PCI
Ver.5.70 -> 5.80 (Web Release 2019.07)
----------------------------------------
- Add support controller
Support controller: CPSN-MCB271-1-041
Ver.5.62 -> 5.70 (Web Release 2019.07)
----------------------------------------
- Checked the operation on Windows 10 19H1.
Ver.5.61 -> 5.62 (Web Release 2019.07)
----------------------------------------
- Fixed an issue that other than Stop conversion by the specified times" can not be set as stop condition of analog output in L series and F series after Ver 5.30 or later.
Ver.5.56 -> 5.61 (Web Release 2019.05)
----------------------------------------
- Add support device
Support device: AI-1004LY-WQ-CN
Ver.5.55 -> 5.56 (Web Release 2019.04)
----------------------------------------
- Fixed an issue that the sampling count may become abnormal with AI-1608VIN-USB or AI-1608AIN-USB.
Ver.5.54 -> 5.55 (Web Release 2019.04)
----------------------------------------
- Fixed an issue that AO-1604VIN-USB or AO-1604AIN-USB can not be initialized in Ver.5.54.
Ver.5.52 -> 5.54 (Web Release 2019.04)
----------------------------------------
- Fixed an issue that AioGetAiSamplingDataEx can not get data properly while sampling with AI-1608VIN-USB or AI-1608AIN-USB.
Ver.5.51 -> 5.52 (Web Release 2019.03)
----------------------------------------
- Fixed an issue that can not be sampling if another application is run while sampling.
Ver.5.50 -> 5.51 (Web Release 2019.03)
----------------------------------------
- Fixed an issue that an exception error may occur when the application is terminated.
Ver.5.40 -> 5.50 (Web Release 2019.03)
----------------------------------------
- Add support device
Support device: AO-1604VIN-USB
AO-1604AIN-USB
Ver.5.33 -> 5.40 (Web Release 2019.02)
----------------------------------------
- Add support device
Support device: AI-1608VIN-USB
AI-1608AIN-USB
Ver.5.32 -> 5.33 (Web Release 2019.01)
----------------------------------------
- Fixed an issue that the repeat does not operate correctly when the start condition ECU and the stop condition specified times with the AIO-163202FX-USB analog output.
Ver.5.31 -> 5.32 (Web Release 2018.12)
----------------------------------------
- Fixed an issue that memory leak occurred when AioMultiAi(Ex) was executed on Wireless I/O-Series or CONPROSYS nano-Series.
Ver.5.30 -> 5.31 (Web Release 2018.12)
----------------------------------------
- Fixed an issue that timing of Event that the specified number of data are stored shifted when using two or more USB products.
Ver.5.23 -> 5.30 (Web Release 2018.11)
----------------------------------------
- Add support device
Support device: CPS-AI-1608LI
CPS-AI-1608ALI
CPS-AO-1604LI
CPS-AO-1604VLI
- Fixed an issue where samples could not be compiled in a specific development language.
Ver.5.22 -> 5.23
----------------------------------------
- Fixed an issue that callback event setting is initialized when Stop function is executed after callback event setting.
Ver.5.21 -> 5.22 (Web Release 2018.11)
----------------------------------------
- Fixed an issue that the last output data becomes abnormal when repeat output with L-Series.
Ver.5.20 -> 5.21 (Web Release 2018.10)
----------------------------------------
- Fixed an issue that 10002 error occurred when AioGetCntMaxChannels was executed on board products.
Ver.5.12 -> 5.20 (Web Release 2018.07)
----------------------------------------
- Add support device
Support device: AI-1004LY-WQ-EU
AI-1004LY-WQ-US
- Changed to be able to get the list of existing devices normally with AioQueryDeviceName
even if information about devices that no longer exist remains.
Ver.5.11 -> 5.12 (Web Release 2018.05)
----------------------------------------
- Fixed an issue that Event that AD conversion start does not occur
when Start Trigger is set to Level comparison in N-Series and Y-Series.
Ver.5.10 -> 5.11 (Web Release 2018.04)
----------------------------------------
- Fixed a problem that data can not be normally acquired
with AioGetSamplingData (AioGetAiSamplingDataEx) in the F-Series.
- Fixed a problem that sampling data could not be acquired correctly
when user buffer of F-Series or Z-Series was used with Windows 10 RS 2 or later.
Ver.5.01 -> 5.10 (Web Release)
----------------------------------------
- Add support device
Support device: AI-1004LY-WQ
CPSN-AI-1208LI
Ver.5.00 -> 5.01 (Web Release)
----------------------------------------
- Fixed a problem that may cause blue screen at shutdown.
- Fixed a problem that AioStartSync sometimes terminates normally
without data acquisition at the second execution.
Ver.4.96 -> 5.00 (Ver.Aug.2017)
----------------------------------------
- Add support development language
Support language: Microsoft Visual Basic 2017
Microsoft Visual C# 2017
Microsoft Visual C++ 2017
- In the definition file (Caio.vb, Caio.bas, Caio.pas),
fixed a problem that AIOM_AOE_DAERR definition was incorrect.
[API-USBP(WDM) Ver.5.00]
- Add support development language
Support language: Microsoft Visual Basic 2017
Microsoft Visual C# 2017
Microsoft Visual C++ 2017
- In the definition file (Caio.vb, Caio.bas, Caio.pas),
fixed a problem that AIOM_AOE_DAERR definition was incorrect.
Ver.4.95 -> 4.96 (Web Release)
----------------------------------------
- Fixed a problem that AioStartAi can not be done even if AioResetAiMemory is executed after overflow occurs.
Ver.4.94 -> 4.95
----------------------------------------
- Fixed a problem that may take about 1 second when AioStartAi or AioStartAo is executed.
Ver.4.93 -> 4.94
----------------------------------------
- Fixed a problem that analog output might not be possible when AioStartAo was executed more than once on the USB device.
- Fixed a problem where parameters in the driver could not be reset when running AioInit.
- Fixed a problem that the number of sampling times becomes 1 when overflow occurs.
- Fixed a problem that increasing number of repeat times with external trigger after operation stopped setting external trigger in RING memory.
- Fixed a problem that "21469" error does not occur when AioStartAi is executed after overflow.
- Fixed a problem where parameters that can be acquired at the time of occurrence of the event are set incorrectly when AD repeat end is set in the event.
- Fixed a problem that analog output was not generated even if analog output data was set.
Ver.4.92 -> 4.93 (Web Release)
----------------------------------------
- Fixed a probrem that an error code 18200 occurrence when AioCntmNotifyTimer argument "hWnd" was set to 0..
Ver.4.91 -> 4.92
----------------------------------------
- Fixed a probrem that which AioStopAi can not stop operation when callback processing is in progress.
Ver.4.90 -> 4.91
----------------------------------------
- Fixed a problem that " A driver inner error occurred " occurred in AioStopAi when AioStartAi and AioStopAi were executed repeatedly.
Ver.4.80 -> 4.90 (Web Release)
----------------------------------------
- Support "Driver Signing policy changes in Windows 10".
- The support on the following OS was terminated
Microsoft Windows 98 and Second Edition
Microsoft Windows Me
- Fixed a problem of freezing when AioStartAi or AioStartAo was executed during operation.
- Fixed a problem of freezing when AioStopAi was executed with AI-1204Z-PCI.
- Fixed a problem that errorcode 10002 occurred when AioGetCntMaxChannels or AioSetCntCallBackProc was executed.
- Fixed a problem that errorcode does not occur when setting the tried to acquire data beyond the converted number
with AioGetAiSamplingDataEx.
- Fixed a problem that " Event that the specified number of data are stored " does not occur
- Fixed a problem where " Event that repeat end " does not occur if sampling clock is fast
- Fixed a problem " AoSamplingTimes " to become abnormal when analog output started.
- Fixed a problem where API-TIMER(WDM) TimInit could not be executed before executing AioInit.
- Fixed a problem that calibration program (caiocal.exe/caiocalf.exe) does not operate properly on AIO-12xx02LN-USB.
- Fixed a problem errocode 20037 occur on AO-1604LX-USB.
Ver.4.73 -> 4.80 (Web Release)
----------------------------------------
- Add support development language
Support language: Microsoft Visual Basic 2015
Microsoft Visual Basic 2015 Express Edition
Microsoft Visual C# 2015
Microsoft Visual C# 2015 Express Edition
Microsoft Visual C++ 2015
Ver.4.72 -> 4.73 (Web Release)
----------------------------------------
- Add support device
Support device: AI-1608GY-USB
Ver.4.71 -> 4.72 (Web Release)
----------------------------------------
- Fixed a bug where the sampling clock error will not occur in a particular sampling clock in USB device.
- Fixed a bug where AioResetAoMemory can perform during the execution of the analog output in USBdevice.
- Update the version of the calibration program(caiocal.exe).
Ver.4.70 -> 4.71 (Web Release)
----------------------------------------
- Fixed a bug that can not be set the external clock to the rising in the AO-1604LX-USB.
- Fixed a bug the error code 10003 occurs in AioInit function when you run a 32bit application in WOW64 to use the USB device.
Ver.4.603 -> 4.70 (Web Release)
----------------------------------------
- Add support OS
Support OS: Microsoft Windows 10
Microsoft Windows 10 x64 Edition
- For F-Series and L-Series, fault correction that count match pulse isn't output.
- For AIO-121601M-PCI, fault correction that the general-purpose input status cannot be retrieved by
function AioCntmReadStatusEx, and the general-purpose input data can not be read by function AioCntmInputDIByte.
- For L-Series and AIO-121601M-PCI, fault correction that the edge setting isn't reflected by AioSetAoClockEdge.
- For AIO-121602LN-USB, AIO-120802LN-USB, AIO-163202FX-USB, AI-1664LAX-USB, AO-1604LX-USB,
fault correction that operation becomes unstable when using comparison count match function.
- For Y-Series, fault correction that the edge setting isn't reflected
if you run functions in the order of AioSetAiClockType->AioSetAiClockEdge.
Ver.4.60 -> 4.603 (API-USBP(WDM) Ver.4.70)
----------------------------------------
- Add support device
Support device: AIO-160802GY-USB
- The defect which can't normally acquire a sampling count is corrected in the AioGetAiStopTriggerCount function
in AIO-163202FX-USB.
Ver.4.53 -> 4.60 (Ver.Dec.2014)
----------------------------------------
- Add support OS
Support OS: Microsoft Windows 8.1
Microsoft Windows 8.1 x64 Edition
- Add support development language
Support language: Microsoft Visual Basic 2013
Microsoft Visual Basic 2013 Express Edition
Microsoft Visual C# 2013
Microsoft Visual C# 2013 Express Edition
Microsoft Visual C++ 2013
- If not in Japanese language environment, the fault which the defined error string of error code 28000 - 28032
cannot be retrieved by funtion AioGetErrorString is corrected.
- For AIO-163202FX-USB, fault correction that processing is not completed by performing AioStopAo function
when AO device buffer is RING mode.
- For USB device, fault correction that event of AO device operation end is notified for two times
when conditions are satisfied.
(Except DAI12-4(USB)GY, DAI16-4(USB))
Ver.4.50 -> 4.53 (Web Release 2014.04)
----------------------------------------
- In F-Series, if it samples to the maximum of a buffer at the time of FIFO mode use,
the fault where the number of times of a sampling is set to 0 and which cannot do data acquisition will be corrected.
- In L-Series and AIO-121601M-PCI, when not setting up the end event of device operation by the sampling of AD,
the fault which processing does not complete by the 2nd AioStartAi function execution is corrected.
- The problem which a proofreading program freezes is corrected in L-Series and AIO-121601M-PCI.
Ver.4.45 -> 4.50 (Web Release 2014.02)
----------------------------------------
- Add support OS
Support OS: Microsoft Windows 8
Microsoft Windows 8 x64 Edition
- Add support development language
Support language: Microsoft Visual Basic 2012
Microsoft Visual Basic 2012 Express Edition
Microsoft Visual C# 2012
Microsoft Visual C# 2012 Express Edition
Microsoft Visual C++ 2012
- For AI-1204Z-PCI, fault correction that [AioStartAi: A user buffer isn't set up] error occurs
by measuring the executive time of function AioGetAiSamplingData, when the program for
measuring the executive speed of function is running in an OS which recognizes memory more than 4G Byte.
- For F-Series and AIO-121601M-PCI, if the conversion start condition is specified
to [Event controller output], [Wait the start trigger] status will not be notified.
- Fault correction that the sampling operation can't be started normally.
- Fault correction that error 20002 occurs by function AioSetTmEvent and AioStartTmCount.
- For L-Series and AIO-121601M-PCI, fault correction that AI repeat function doesn't work normally.
- For AI-1204Z-PCI, fault correction that exception error occurs by performing function AioExit.
- For L-Series and AIO-121601M-PCI, fault correction that data doesn't output normally
by function AioMultiAo and AioMultiAoEx, after calling AO continuous functions.
- The fault is corrected, which an error indicating that [Contec USB Service] has failed to start is recorded
in the event log, if a USB device was removed without uninstalling the driver.
Ver.4.36 -> 4.45 (Web Release 2013.11)
----------------------------------------
- For USB device with counter function, fault correction that it can't count,
if count start and count stop are performed repeatedly.
- For AIO-163202FX-USB, fault correction that sampling clock error (20000H) occurs,
if AO repeat is terminated by the conversion stop conditions other than times stop.
- For F-Series and L-Series, fault correction that the repeat count doesn't increase,
if AO repeat and software start are set.
- For AIO-163202FX-USB, fault correction that repeat runs over the specified times,
when using AO repeat function.
- Mistake correction of the strings can be retrieved by function AioGetErrorString
corresponding to the return values 12381 and 12382.
- For AI-1204Z-PCI, fault correction that [Event that the specified number of data are stored]
occurs after [Event that device operation end].
- For Y-Series, fault correction that it can't output to DO03.
- Fault correction that blue screen occurs, when simple I/O functions are performed.(Except USB device)
Ver.4.30 -> 4.35 (Ver.July.2013)
----------------------------------------
- In F-Series and L-Series, AO repeat function corrects the fault which does not operate normally.
- In L-Series, if 2 is set to the argument of AioSetAoStopTrigger,
the fault to which 23260 errors return will be corrected.
- The fault which cannot perform the sampling start by a level trigger normally
by AI-1664LAX-USB is corrected.
- If AioStartAo, AioGetAoStatus, and AioStopAo are repeated in order
in DA12-16(PCI), DA12-8(PCI), DA12-4(PCI), and DAI16-4C(PCI),
it will correct that a sampling clock error may occur.
Ver.4.27 -> 4.30
----------------------------------------
- It will correct that BSoD may occur, if AioSetAiStopTimes or AioSetAiRangeAll is performed in DEMO DEVICE.
- If AioGetCntMaxChannels is performed by the USB device which does not have a counter function,
although a counter function does not exist, the fault to which CntMaxChannels=1 returns will be corrected.
- If AioResetProcess is performed in the USB device which has a counter function,
the unfixed value which is not defined will correct the fault which returns as an error.
- In L-Series with the function of AI and AO both, if a sampling is started in order of AI and AO,
the fault stopped in the middle of the sampling of AI while status has been busy will be corrected.
- In AI-1204Z-PCI, if samples, such as SingleAi, are performed by a debug mode,
and a debugger is forced to terminate after performing AioInit, it will correct that BSoD may occur.
Ver.4.25 -> 4.27
----------------------------------------
- In PC which recognizes the memory of 4 GByte or more, execution of AioResetDevice will correct that
an error code 21985 may occur.
- It corrects that a pulse-like waveform may be outputted to instruction execution time
in AioInit or AioResetDevice by AIO-163202FX-USB.
Ver.4.22-> 4.25
----------------------------------------
- Fault correction that 11460 error code is generated, at the start of the second sampling in Windows 98.
- Fault correction that FIFO is empty (data retrieved 0) does not return an error code 21584,
even at run-time state of AioGetAiSamplingData.
Ver.4.21-> 4.22 (Web Release)
----------------------------------------
- Fault correction that there is a possibility that BSoD occurs,
when execute a function after execution AioResetProcess, in multiple processes.
Ver.4.20-> 4.21 (Web Release)
----------------------------------------
- Z-Series and F-Series, on Windows 64bit OS, and has the memory more than 4G Byte,
If you set more than 1MByte the buffer, so that the error returned by 21985 Fix
and AioSetAiMemorySize AioSetAiTransferData.
PC in this condition, if you want to use the C-LOGGER Ver.1.27, you must use this version of the driver.
Ver.4.11-> 4.20
----------------------------------------
- Support WOW64 (Since Windows 7)
- Fault correction that AioStartAi does not complete,
when it is executed in the order of AioMultiAi->AioStartAi with AI-1204Z-PCI.
- Fault correction that function AioGetAiSamplingData can not acquire the data,
which's number is set by function AioSetAiStopTimes.
- Fault correction that the sampling data can not be acquired successfully
by User buffer mode (bus master) in 64bit OS.
- Fault correction that the application is exited without performed AioExit when sampling.
- Fault correction that the sampling clock error is returned as a buffer overflow error,
when a USB device is used with external clock.
- Fault correction that memory leak occurs when AioStartAi is performed continuously
with a USB device.
- When a count match event occurs with L-Series, the value passed to the parameter (lParam) of the event routine
is modified from current count value to the count value (comparison value) when event has occurred.
- Fault correction when the parameter PresetNumber of function AioSetCntPresetReg is changed and
funtion AioStartCnt is executed, even if a count match event doesn't occur, the count value is
changed to be the value set by parameter PresetNumber.
- Fault correction that the data is interchanged between channels which is acquired by AioGetAiSamplingData etc.,
when using AI-1604CI2-PCI (ADI16-4C(PCI)).
- Fault correction that the internel clock of AIO-163202FX-USB can not be output to external.
- Fault correction that AioGetCntMaxChannels can not be used with AIO-163202FX-USB.
- Fault correction that the scan clock can not be set successfully and the sampling is to be unusually fast,
if the parameter AiScanClock of function AioSetAiScanClock is set a decimal point when using E-Series board.
Ver.4.10 -> 4.11 (Web Release)
----------------------------------------
- Fault correction when two or more USB devices including the other categories are used in the same process,
the USB devices doesn't work normally.
- Fault correction that the return value is 20001, when function
AioSetAiMemorySize/AioGetAiMemorySize is called for the devices which can
support the functions.
- Fault in mixed use of a simple function and a sampling function is corrected at the time of AIO-163202FX-USB use.
Ver.4.01 -> 4.10 (API-USBP(WDM) Ver.4.60)
----------------------------------------
- Add support development language
Support language: Microsoft Visual Basic 2010
Microsoft Visual Basic 2010 Express Edition
Microsoft Visual C# 2010
Microsoft Visual C# 2010 Express Edition
Microsoft Visual C++ 2010
- Add support device
Support device: AIO-121602LN-USB
AIO-120802LN-USB
Ver.4.00 -> 4.01
----------------------------------------
- Solves the problem that the function returns 20003 errors at multiprocessing.
- Under specific conditions "AoSpec.exe" to be used to hang fixes.
Ver.3.90 -> 4.00 (API-USBP(WDM) Ver.4.40)
----------------------------------------
- Add support OS (USB device)
Support OS: Microsoft Windows 7 64bit Edition
Microsoft Windows Server 2008 64bit Edition
Microsoft Windows Vista x64 Edition
Microsoft Windows Server 2003 x64 Edition
Microsoft Windows XP Professional x64 Edition
- Add support device
Support device: AI-1664LAX-USB
- Fault correction with the function declaration file of Visual Basic.NET
- Fault correction that the return value is 0 (Normality completion), when function
AioSetAiMemorySize/AioGetAiMemorySize is called for the devices which can not
support the functions.
- Fault correction that the acquisition value is always 0, when function AioGetAiStopTriggerCount
is called for DEMO board.
- Fault correction that the clock is shorter than the specified value of function AioSetAiSamplingClock,
when clock is set to be 1.4usec, 1.3usec, 0.9usec, 0.7usec.
Ver.3.80 -> 3.90 (API-USBP(WDM) Ver.4.20)
----------------------------------------
- Add support device
Support device: AO-1604LX-USB
- Solve the problem that AioSetControlFilter function
doesn't work correctly.(AIO-163202FX-USB)
- Solve the problem that the last data may collapse
when AD conversion is repeated.(AIO-163202FX-USB)
- Solve the problem that the value of AioGetAiStopTriggerCount function becomes 0
after executing AioStopAi function.(L-Series)
- Solve the problem that 23260 error occures when
value 2 is set to AioSetAoStopTrigger function.(L-Series)
Ver.3.70 -> 3.80 (Web Release 2010.04)
----------------------------------------
- Solve the problem that the application locks up when
AioStartAi and AioStopAi functions are executed repeatedly.(AI-1204Z-PCI)
- Solve the problem that 23341 error occurs when executing
AioSetAoStartTrigger function.
Ver.3.62 -> 3.70 (API-USBP(WDM) Ver.4.10, Web Release 2009.11)
----------------------------------------
- Add support OS
Support OS: Microsoft Windows 7
Microsoft Windows 7 64bit Edition (Except for USB device)
- Solve the problem that the application locks up when
initialization->initiation->termination process is repeated twice.(AI-1204Z-PCI)
- Solve the problem that 20003 error occurs when executing
AioInit after the application crashed.(AI-1204Z-PCI)
- Solve the problem that overflow event doesn't ocuur.(AI-1204Z-PCI)
- Solve the problem that sampling clock error status doesn't ocuur
when transfer process is not on time.(AI-1204Z-PCI)
- Solve the problem that the last bainary data is set to 0 when acquireing data
under single-channel and odd number of sampling.(AI-1204Z-PCI)
- Solve the problem that time interval of timer and
stopwatch is not correct.(AI-1204Z-PCI)
- Solve some problems about RING memory mode.(AI-1204Z-PCI)
Ver.3.61 -> 3.62 (API-USBP(WDM) Ver.4.00)
----------------------------------------
- Solve the problem that hang-up may occurs when using
AioGetAiSamplingData funcrion with RING memory.(E-Series)
- Solve the problem that hang-up may occurs when executing
AioInit, AioStartAo and AioExit funcrion repeatedly.(AO devices)
- Solve the problem that 21960 error occurs when
specifies device-buffer-mode by AioSetAiTransferMode function.(Z-Series)
- Solve the problem that error occurs while hardware-installation
on Windows 2000.
Ver.3.52 -> 3.61 (Web Release 2009.05)
----------------------------------------
- Solve the problem that 20001 error occures when setting
the function AioSetAiTransferMode, AioSetAoTransferMode, everytime.
- Solve the problem that, under the state of "Wait the start trigger",
the hang-up occurs when AioExit is performed (E-Series)
- Solve the problem that overflow error was occured.(AI-1204Z-PCI).
- Solve the problem that repeating operation software start -
stop conversion by the specified times, rock the devices(AI-1204Z-PCI).
- Solve the problem that repeating operation AioStartAi - AioStopAi,
or AioStartAi - AioResetDevice, rock the devices(AI-1204Z-PCI).
Ver.3.52 -> 3.60 (API-USBP(WDM) Ver.3.90)
----------------------------------------
- Add support device
Support device: AIO-163202FX-USB
Ver.3.51 -> 3.52 (Ver.Mar.2009)
----------------------------------------
- Solve the problem in counter function of AIO-121601M-PCI.
Ver.3.50 -> 3.51 (Web Release 2009.02)
----------------------------------------
- Add support OS
Support OS: Microsoft Windows Server 2008
Microsoft Windows Server 2008 64bit Edition (Except for USB device)
Ver.3.47 -> 3.50 (Ver.Jan.2009)
----------------------------------------
- Add support development language
Support language: Microsoft Visual C++.NET C++/CLI
- Add support device
Support device: AIO-121601M-PCI
- Add new functions
AioGetCntmMaxChannels
AioSetCntmZMode, AioSetCntmZLogic
AioSelectCntmChannelSignal, AioSetCntmCountDirection
AioSetCntmOperationMode, AioSetCntmDigitalFilter
AioSetCntmOutputHardwareEvent, AioSetCntmInputHardwareEvent
AioSetCntmCountMatchHardwareEvent, AioSetCntmPresetRegister
AioGetCntmZMode, AioGetCntmZLogic
AioGetCntmChannelSignal, AioGetCntmCountDirection
AioGetCntmOperationMode, AioGetCntmDigitalFilter
AioCntmStartCount, AioCntmStopCount
AioCntmPreset, AioCntmZeroClearCount
AioCntmReadCount
AioCntmNotifyCountUp, AioCntmStopNotifyCountUp
AioCntmCountUpCallbackProc, AioCntmNotifyCounterError
AioCntmStopNotifyCounterError, AioCntmCounterErrorCallbackProc
AioCntmNotifyCarryBorrow, AioCntmStopNotifyCarryBorrow
AioCntmCarryBorrowCallbackProc, AioCntmNotifyTimer
AioCntmStopNotifyTimer, AioCntmTimerCallbackProc
AioSetCntmTestPulse, AioCntmReadStatusEx
AioCntmInputDIByte, AioCntmOutputDOBit
Ver.3.46 -> 3.47 (Web Release 2008.10)
----------------------------------------
- Solve the problem that when set External clock, and set internal clock.
Next, start sampling by external clock, sampling clock error was occured.(AI-1204Z-PCI).
Ver.3.45 -> 3.46 (Ver.Oct.2008)
----------------------------------------
- Solve the problem that when continuous sampling like sample AiLong,
sampling is stopped (DEMO device and devices other than F-Series, L-Series, E-Series)
- Add the function that when operating sampling used ring memory,
it is able to get a sampling data(E-series).
- Solve the problem that repeating operation AioStartAi - AioStopAi,
or AioStartAi - AioResetDevice, rock the devices(AI-1204Z-PCI).
- Solve the problem that using Busmaster, sampling data is odd data
(Busmaster device).
- Solve the problem that events are not occured by setteing condition.
- Support API-TIMER(WDM).
Ver.3.44 -> 3.45 (Web Release 2008.07)
----------------------------------------
- Add support development language
Support language: Microsoft Visual Basic 2008
Microsoft Visual Basic 2008 Express Edition
Microsoft Visual C# 2008
Microsoft Visual C# 2008 Express Edition
Microsoft Visual C++ 2008
- Solve the problem that the output does not wait for the next repeat operation
and the output progresses if the conditions for multiple repeat and external trigger start are set
(devices other than F-Series, L-Series, E-Series).
Ver.3.43 -> 3.44 (Web Release 2008.05)
----------------------------------------
- Solve the problem that if using the function AioSetAiRange, and AioSetAiRangeAll,
it is not able to get correct sampling data from devices(F-Series, L-Series).
Ver.3.42 -> 3.43 (Web Release 2008.05)
----------------------------------------
- Solve the problem that Diagnosis Program can't be operated normally,
when using CPU-CA10+FIT device with AI-1608AY-USB or AIO-160802AY-USB.
- Solve the problem that API Functions for AI-1608AY-USB or AIO-160802AY-USB
can't be operated normally, when using CPU-CA10+FIT device
with AI-1608AY-USB or AIO-160802AY-USB.
Ver.3.41 -> 3.42 (Web Release 2008.04)
----------------------------------------
- Solve the problem that a calibration program can't be ,
and returns 22204 error (ADA16-32/2(CB)F).
- Solve problems that it changes to unlimited Repeat,
and the callback setting, and call AioStopAi on sampling,
application hangs irregularly.
- Solve the problem when sampling Memory full, it is not able to
get sampling data from devices.
Ver.3.40 -> 3.41 (Ver.Apr.2008)
----------------------------------------
- Solve the problem that the level trigger setting is not reflected
when using USB-devices.
- Solve the problem that the event could not be raised and the operation stops
due to overflow when performing continuous sampling input
by using repeat and after a certain number of times.
(DEMO device and devices other than F-Series, L-Series, E-Series)
- Solve the problem that does not work properly when repeat setting is performed (L-Series).
- The mistake device name were corrected
(AI-1664LA-LPE, AO-1608L-LPE, AO-1616L-LPE).
- AI-1204Z-PCI supports the following functions
AioSetAiStartInRangeEx, AioGetAiStartInRangeEx
AioSetAiStartOutRangeEx, AioGetAiStartOutRangeEx
AioSetAiStopInRangeEx, AioGetAiStopInRangeEx
AioSetAiStopOutRangeEx, AioGetAiStopOutRangeEx
- Solve the problem that 21440 error occures when
using the function AiSamplingClock set 10usec everytime
(ADA16-8/2(CP)L, AD16-64(LPCI)LA, AI-1664LA-LPE).
Ver.3.31 -> 3.40 (Ver.Jan.2008 for AIO)
----------------------------------------
- Add support device
Support device: AI-1204Z-PCI
AIO-160802LI-PE
AI-1616LI-PE
AO-1604LI-PE
AI-1664LA-LPE
AO-1608L-LPE
AO-1616L-LPE
Ver.3.30 -> 3.31 (Web Release 2008.01)
----------------------------------------
- Solve the problem that the dialog of "DeviceType Unknown Error" is displayed
when using AD12-8(PM) using on the property page on the device manager.
- Solve the problem that OS hangs when using DEMO Device
Ver.3.21 -> 3.30 (Ver.Jan.2008)
----------------------------------------
- Solve the problem that the number of handle on the task manager
increases every time the application is operated.
- Solve the problem that a calibration program can't be adjusted,
and returns 22204 error(L-Series).
- Solve the problem that 20001 error occures when setting
the function AioSetDiFilter, AioGetDiFilter, everytime.
- Solve the problem that correct Range can't be set
by the function AioSetAiRange, AioSetAiRangeAll.
Ver.3.20 -> 3.21 (Web Release 2007.10)
----------------------------------------
- Solve the problem that occures while using ACX-PAC(W32)
Ver.3.10 -> 3.20 (Ver.Oct.2007)
----------------------------------------
- Add support development language
Support language: Microsoft Visual Basic 2005 Express Edition
Microsoft Visual C# 2005 Express Edition
- Add support device
Support device: AIO-121601E3-PE
AIO-121601UE3-PE
AIO-161601E3-PE
AIO-161601UE3-PE
- Solve the problem that 21061 error occures when
setting the function AioSetAiRangeAll everytime (E-Series).
- Solve the problem that the dialog of "DeviceType Unknown Error" is displayed
when using DemoDevice using on the property page on the device manager.
- Solve problems that it changes to Ring memory form, a limited sampling,
and the callback setting using USB-devices, and AiStart is repeated,
sampling operation stoped.
Ver.3.00 -> 3.10 (Ver.Jun.2007)
----------------------------------------
- Add support OS (Except for USB device)
Support OS: Microsoft Windows Vista x64 Edition
Microsoft Windows Server 2003 x64 Edition
Microsoft Windows XP Professional x64 Edition
- Add support device
Support device: AI-1216B-RB1-PCI
AI-1216B-RU1-PCI
Ver.2.30 -> 3.00 (Ver.Feb.2007)
----------------------------------------
- Add support OS
Support OS: Microsoft Windows Vista
- Add support device
Support device: AIO-121602AH-PCI
AIO-121602AL-PCI
AI-1216AH-PCI
AI-1216AL-PCI
- Add digital-signing to device driver
- Add device driver auto-installation function (W2000 series only)
- Add version check of DLL and SYS function
- Support standby mode
- Add new functions
AioResetProcess, AioStartAiSync
AioSetAiStartInRangeEx, AioGetAiStartInRangeEx
AioSetAiStartOutRangeEx, AioGetAiStartOutRangeEx
AioSetAiStopInRangeEx, AioGetAiStopInRangeEx
AioSetAiStopOutRangeEx, AioGetAiStopOutRangeEx
- Add utility for Visual Studio.NET
- Solve the problem that OS hangs when using DEMO Device
- Solve the problem that sometimes AD or DA conversion error
occures when using simple functions (other than F-Series and L-Series)
- Solve the problem that OS hangs by clicking AioGetAiSamplingData
when using CAIOSPEC.EXE (E-Series)
- Solve the problem that motion doesn't complete unless one more
sampling clock number which is specified (other than E-Series, F-Series and L-Series)
- Solve the problem that data misalignment occures among channels
under conditions of using multi channels, external trigger start,
stop conversion by the specified times and multiple repeat times (L-Series)
Ver.2.20 -> 2.30 (Web Release 2006.12)
----------------------------------------
- Solve the problem that AioGetAiSamplingCount function may
return invalid value on multi-core CPU (E-Series)
- Shorten the execution time and reduce the time variation of
AioStartAi, AioStartAo, AioStartTmTimer and AioStartCnt function
- Solve the problem that the event that specified number of data are stored
may not occur depend on the process conditions
Ver.2.10 -> 2.20 (Web Release 2006.09)
----------------------------------------
- Solve the problem that occures while using ML-DAQ
Ver.1.90 -> 2.10 (Ver.Aug.2006)
----------------------------------------
- Add support device
Support device: AIO-160802L-LPE
AI-1616L-LPE
AO-1604L-LPE
Ver.1.80 -> 1.90 (Ver.Apr.2006)
----------------------------------------
- Add support development language
Support language: Microsoft Visual Basic 2005
Microsoft Visual C# 2005
Microsoft Visual C++ 2005
- Add support device
Support device: AIO-163202F-PE
DA16-8(LPCI)L
DA16-4(LPCI)L
Ver.1.70 -> 1.80 (Ver.Feb.2006)
----------------------------------------
- Support C-LOGGER Ver.1.0
Ver.1.60 -> 1.70 (Ver.Nov.2005)
----------------------------------------
- Add support device
Support device: AD12-16(PCI)EV
AD12-16U(PCI)EV
AD16-16(PCI)EV
AD16-16U(PCI)EV
AD16-64(LPCI)LA
Ver.1.50 -> 1.60 (Ver.Aug.2005)
----------------------------------------
- Add support OS
Support OS: Microsoft Windows Server 2003
- Add support device
Support device: ADAI16-8/2(LPCI)L
ADI16-16(LPCI)L
DAI16-4(LPCI)L
- Add new functions
AioSetAiClockEdge, AioGetAiClockEdge
AioSetAoClockEdge, AioGetAoClockEdge
Ver.1.42 -> 1.50 (Ver.Apr.2005)
----------------------------------------
- Support MATLAB Data Acqiosition Toolbox
Ver.1.41 -> 1.42 (Web Release 2005.01)
----------------------------------------
- Solve the problem that an automation error occurs
while using ACX-AIO.
Ver.1.40 -> 1.41 (Ver.Jan.2005)
----------------------------------------
- Support Hyper-Threading PC
- Solve the problem that diagnosis program occurs error code 4
occasionally with PCI boards
- Solve the problem that acquired data become misaligned
between each channels when using multi channels (L-Series)
Ver.1.31 -> 1.40 (Ver.Oct.2004)
----------------------------------------
- Add support device
Support device: ADA16-8/2(CB)L
- Solve the problem that gain adjustment cannot do
a calibration program manually.
(F-Series, ADA12-8/2(LPCI), AD16-16(LPCI)L)
Ver.1.30 -> 1.31 (Ver.Jun.2004)
----------------------------------------
- Add support development language
Support language: Microsoft Visual C#.NET 2002
Microsoft Visual C#.NET 2003
- Support scan clock setting (E-Series, F-Series)
- Support acquiring substrate temperature (ADI16-4L(PCI))
- Solve the problem that AI motion does not stop normally
if stop condition is changed by AioSetEcuSignal function
(F-Series)
- Solve the problem that AO motion does not stop normally
if stop condition is changed by AioSetEcuSignal function
(F-Series)
- Solve the problem that the falling edge can't be specified
when using external trigger start or stop mode
(AD12-64(PCI), AD12-16(PCI))
- Solve the problem that Lap value of AioGetAiTransferLap
becomes unusual when transfering more than 64Mb data in
bus master mode (F-Series)
- Solve the problem that AioSetAiChannelSequence is invalid
to AioMultiAi function (E-Series)
Ver.1.21 -> 1.30 (Ver.Nov.2003)
----------------------------------------
- Add support device
Support device: ADA16-8/2(LPCI)L
AD16-16(LPCI)L
DA16-4(LPCI)L
Ver.1.20 -> 1.21 (Web Release 2003.06)
----------------------------------------
- The following functions are added to uninstaller
Delete setup information files that reproduced by the system
Delete the device registered into the device manager
- Solve the problem that a diagnostic program forces to terminate
when a range is made a uni-Poral setup (E-Series)
- Solve the problem which will be forced to terminate
if x button is pushed during operation by AiSpec and AoSpec
- Solve the problem which may be unable to set up a value normally
with AiSetAiSamplingClock and AiSetAoSamplingClock function
is corrected (all devices)
- Solve the problem that DI data is not appended
(F-Series)
- Solve the problem that will hang-up if AioExit function is performed
inputting an external trigger continuously by Ai and Ao function
(F-Series)
- Solve the problem that cannot set up any ranges other than
-10V - +10V or 0V - +10V and 4mA - 20mA with AioSetAiRangeAll function
(ADI12-16(PCI))
- Solve the problem that an omission generates to output data
when a repeat output function is used by the RING memory
(DA12-16(PCI), DA12-8(PCI), DA12-4(PCI))
- Solve the form error of AioSetAiChannelSequence and AioGetAiChannelSequence
(CAIO.BAS, CAIO.VB, CAIO.PAS)
Ver.1.10 -> 1.20 (Web Release 2003.03)
----------------------------------------
- Support English OS, Language, Tools
- CAIO.DLL is sharable between API-AIO(WDM) and API-USBP(WDM)
- Solve the problem that the converted data isn't right (AD16-4L(PCI))
- Solve the problem in sample AiEx
that the converted data in saved file is broken
- Solve the problem that error occurs in
AioSetAiStartInRange, AioSetAiStartOutRange,
AioSetAiStopInRange and AioSetAiStopOutRange functions
Ver.1.04 -> 1.10 (Ver.Dec.2002)
----------------------------------------
- Add support development language
Support language: Microsoft Visual C++.NET
Microsoft Visual Basic.NET
- Add support device
Support device: ADA16-32/2(PCI)F
ADA16-32/2(CB)F
- Add new functions
- Add new samples
- Solve the problem that the application is locked if other functions
are used when the AioInit function failed (all devices)
- Solve the problem that AioInit function succeeds even if the board JP
is in the state that the interrupt is disabled (E-Series)
- Solve the problem that the system exceptionally hangs up when the sampling clock error
occurs because of the high-speed operation of analog I/O (all devices)
- Add NULL check and error code to functions AioQueryDeviceName and
AioGetDeviceType(all devices)
- Solve the problem that error occurs when channel 0 is specified for
AioEnableAo and AioDisableAo (DAI16-4C(PCI))
- Solve the problem that multi-channel output is abnormal (DAI16-4C(PCI))
- Solve the problem that "Normality completion" is returned even if
10820 error occurs(E-Series)
- Correct the driver in order to return error when function AioStartAi
is executed without resetting the memory after buffer overflow error
occurs(all devices)
- Solve the problem that AD conversion error exceptionally occurs
in function AioSingleAi (AD16-16U(PCI)EH)
- Solve the problem that the ranges other than +/-10V, 0 to 10V and
4mA to 20mA can not be set (ADI12-16(PCI))
- Solve the problem that D/A conversion error exceptionally occurs in
both function AioSingleAo and function AioMultiAo(DA12-16(PCI),
DA12-8(PCI), DA12-4(PCI))
- Solve the problem that the used handle is not opened when
AioStartAi is performed (E-Series)
- Solve the problem that graph drawing of both utility AiSpec and
utility AoSpec does not support multi-channels(AD12-16U(PCI)EH, AD16-16U(PCI)EH)
- Solve the problem that the old data is acquired in function AioSingleAi
(ADI16-4C(PCI))
- Solve the problem that +/-2.5V can not be set in function AioSetAiRange
(AD12-16U(PCI)EH)
Ver.1.03 -> 1.04 (Ver.Aug.2002)
----------------------------------------
- Make modifications in order that the failure in retrieving
the sampling count is more difficult to come off (E-Series)
- Solve the problem that the sampling clock error occurs
at the 65535th time of event if you perform the operation
in sample AiLong(E-Series)
- Solve the problem that the converted data cannot be acquired
normally from expansion channels when channels have been expanded
(E-Series)
- Solve the problem that W9x cannot start up as the card is plugged
when you use cards on a note PC(AD12-8(PM))
- Solve the problem that the raising of sampling clock causes
the memory violation(AD12-8(PM))
- Solve the problem that the incorrect converted data are acquired
when the sampling clock is speeded to 10usec or so(AD12-8(PM))
- Solve the problem that the sampling clock cannot be changed
when external start trigger is used(DA12-16(PCI), DA12-8(PCI), DA12-4(PCI))
Ver.1.02 -> 1.03 (Web Release 2002.02)
----------------------------------------
- Add driver update method to help
- Add tutorial for simple digital I/O to help
- The JP setting and pin assignment is illustrated in
Driver Specifications-Specifications based on devices of help(Japanese only)
- Solve the problem that, if the sample AiLong is used on W9x,
the event doesn't occur when "Event that the specified number
of data are stored" occurs and the window is moved
- Solve the problem that the system hangs in sample MultiAo(AD12-8(PM))
- Solve the problem that the data is incorrect in sample MultiAi
(AD12-8(PM))
- Solve the problem that the practical conversion speed is abnormal
and data is incorrect in sample AiEx(AD12-8(PM))
- Solve the problem that the status "Device is running" doesn't
become OFF if the sampling times is set to 1
- Correct the sample programs
- Take out the description mistakes in help
Ver.1.01 -> 1.02
----------------------------------------
- Solve the problem that the driver cannot be used on W2000
if you login as a user
- Solve the problem that 0 is returned instead of 21441
- Solve the problem that "Store up to the specified number
of data" status doesn't become OFF even if retrieving data
is performed (E-Series)
- Solve the problem that, under the state of "Wait the start trigger",
the error 21480 occurs when AioStopAi is performed (E-Series)
- Correct the sample programs
- Take out the description mistakes in help
Ver.1.00 -> 1.01
----------------------------------------
- Solve the problem that the repeat operation cannot be performed normally
(E-Series)
- Make modifications in order that "Event that repeat end" is not fired
when the repeat operation completely finished (E-Series)
- Make modifications in order that the clock error set by driver is
reset by AioResetAiStatus or AioStartAi (E-Series)
- Solve the problem that not only clock error occurs, but also conversion
termination event occurs when the conversion speed is too fast, the driver
cannot process them in time (E-Series)
Ver.1.00 (Ver.Jan.2002)
----------------------------------------
- First release