CONPROSYS VTC 脚本程序例

CONPROSYS VTC
(Visual Task Control)(标准配置)
CONPROSYS HMI
(Human-Machine Interface)(标准配置)
Partner Solutions
软件开发Kit
CONPROSYS VTC 脚本程序例
支持软件

常用的监视和控制任务的脚本语言程序例

CONPROSYS M2M控制器和M2M网关控制器内置的任务脚本功能的示例程序。这些示例程序是一些常用的测量处理和控制处理。

任务脚本功能“CONPROSYS VTC（视觉任务控制）”的特长

不需要编程语言方面的专业知识。
将工具箱中的功能图标（如计算，条件分支，云数据传输等）拖放到脚本任务的网格区域。
编写任务脚本程序可以像绘制过程程序的流程图一样简单。

COPROSYS VTC

*
下载文件和软件需事先进行用户账号注册

用户账号注册(MyContec会员)

通信

脚本程序	说明	使用方法	下载 (需要认证)
FIT Protocol Communication Sample	A sample program for acquiring IO data using FIT protocol in which two CONPROSYS units are connected via a LAN cable.	Read Document	Download

LoRa模块发送和接收程序

脚本程序	说明	使用方法	下载 (需要认证)
LoRa Transmission and Reception routine	Transmit data that is received by LoRa Reception and Transmission. After transmitting, receive a response from transmission destination.	Read Document	Download
LoRa Reception and Transmission routine	Receive data that is transmitted by LoRa Transmission and Reception. After receiving, transmit data to the transmission source	Read Document	Download

连接传感器

脚本程序	说明	使用方法	下载 (需要认证)
Getting and display states of the AirGRID series indicator lights of PATLITE Corporation.	Getting on/off information of an indicator light from the AirGRID series receiver via Ethernet.	Read Document	Download
Send lighting pattern information to LA6-POE series manufactured by PATLITE CO., LTD	CONPROSYS M2M Gateway's analog input (AI0) is judged and the lighting pattern information is transmitted to the LA6-POE series via Modbus/TCP.	Read Document	Download
Send lighting information to NH-FV series manufactured by PATLITE CO., LTD.	Determine the current value input to the analog input (AI 0) of CONPROSYS Then I will transmit the lighting information to the NH - FV series via Ethernet.	Read Document	Download
Pulses Count and Storage (1 Minute Interval)	Measure increment of counter value at 1 minute interval.	Read Document	Download

控制

脚本程序	说明	使用方法	下载 (需要认证)
Self-holding Circuit	An ON state of one input turns the output of this circuit to be ON. Then the output keeps its ON state. An On state of another input resets this output.	Read Document	Download
Self-holding Circuit (Buzzer Circuit)	One contact input is used as abnormal signal input. Once the input state sets to ON, the buzzer output keeps being ON. Another input is connected to "buzzer off" push button. When the button is pushed, the buzzer output is turned to OFF.	Read Document	Download
Flashing Circuit	ON state of input blinks the lamp connected to the output.	Read Document	Download
Digital Switch Input （4-bit）	Read four digital switch inputs, DI0 to DI3 into the tag as one digit decimal number.	Read Document	Download
7-segment Display (Two Digits)	Use 8 bits of digital output, DO0 to DO7 to drive a 7-segment display (two digits).	Read Document	Download
7-segment Display With Strobe	Use 8 bits of digital output, DO0 to DO7 to drive a strobe type 7-segment display (four digits).	Read Document	Download
Counter Setting (Two digits)	Use 8 bits of digital input, DI0 to DI7 to set counter (two digits) The count data is desplayed on a 7-segment display (two digits) through the 8 bits of digital output, DO0 to DO7.	Read Document	Download
Anti-chattering Circuit (Four-digit Up Down Counter)	Anti-chattering ciucuits of DI0 to DI3 digital inputs. A 4-digit up / down counter is used as an application example.	Read Document	Download

监控

脚本程序	说明	使用方法	下载 (需要认证)
Monitor Upper Limit of Analog Input	Monitor the analog input value and turn the output ON if it is over the upper limit value.	Read Document	Download
Monitor Lower Limit of Analog Input	Monitor the analog input value and turn the output ON if it is less than the lower limit value.	Read Document	Download
Monitor Upper and Lower Limits of Analog Input	Monitor the analog input value and turn the output ON if it is outside the upper and lower limit values.	Read Document	Download

数据演算和变换

脚本程序	说明	使用方法	下载 (需要认证)
Industrial Value Conversion	Convert analog input data to industrial value.	Read Document	Download
Maximum, Minimum and Average of Analog Input Values	Calculate the maximum, minimum and average values within 1minute of analog inputs, with an input interval of 1 second.	Read Document	Download

研讨会资料

CONPROSYS系列的研讨会资料Ver. 3.20 (英语)

资料请求, 报价, 购买前的咨询

研讨会资料免费下载

CONPROSYS系列的研讨会资料Ver. 3.20 (英语)

免费下载
资料请求, 报价, 购买前的咨询

联系我们