COM-2PD-PE 串行通信 PCI Express 总线板卡 RS-422A/485 2ch / 隔离・防浪涌电流

• 概要・特点
• 机能・规格
• 订购信息・选件
• 技术支持・下载

概要・特点

This product is a PCI bus-supported card designed for extending RS-422A/485 compatible serial communication functionality on your PC. It has two RS-422A/485-standard serial ports. Higher noise-resistant models with isolation between channels and between PC and bus line as well as a surge protection circuit for communication ports. With a 128byte built-in FIFO buffer for transmission and reception of each channel, the product supports a baud rate of up to 921,600bps. It also comes with a Windows/Linux driver, which allows cards to be used as OS-standard COM ports.

• Max. 921,600bps RS-422A/485 Serial Communication

  • The < COM-2PD-PE > has two RS-422A/485-standard serial ports. Baud rates from 2 to 921,600bps can be set. When using the “Standard COM Driver Software” and “Driver library APIPAC(W32)”, baud rates from 15 to 921,600bps can be set.
• Possibly used as Windows, Linux-standard COM ports, using the supported driver library

  • Comes with a driver software that allows the boards to be used under Windows / Linux in the same way as COM ports on the PC. Under Windows, the product supports the OS-standard Win32 API communication function as well as Visual Basic MSComm. Under Linux, OS-standard tty driver’s standard function can be used. In addition, supplies a diagnostic program to confirm hardware operation and to perform a communication test with equipment.
• Isolation between channels and between PCs, surge protection for all signal lines

  • The channels are electrically isolated from each other and from the PC. As isolation is provided between channels as well as isolation of the bus, this prevents electrical noise between channels as well as between the PC and external circuits. As surge protection is provided on all signal lines, you can safely use the boards in environments where you are concerned about surges causing incorrect operation or damage to the PC.
• Max. 16 boards can be installed as configured in the range COM1 - COM256.

  • Up to 16 boards can be mounted on a single PC. COM1 - COM256 can be set using the device manager.
• Each channel is equipped with separate 128-byte FIFO buffers for transmit and receive.

  • Employed a buffer memory 128-byte dedicated to transmission and 128-byte for each channel. These are FIFO format, useful for high speed communications and to reduce the load to the CPU when transmitting/receiving. As the device manager can be used to enable/disable the use of FIFO and set the FIFO trigger size, this permits operation to be adjusted to achieve optional performance for your system.