DIO-0808LY-USB Digital I/O USB I/O Terminal 8ch/8ch (isolated 12 - 24VDC) - the Y series

* The end of repair date may change depending on the situation.

Opto-coupler isolated input (supporting current sink output) and opto-coupler isolated open-collector output (current sink type)
Compatible to USB2.0/USB1.1 and not necessary to power this product externally as the bus power is used.
Opto-coupler bus isolation
Zener diode for surge voltage protection and the circuit for overcurrent protection
Easy-to-wire terminal connector adopted
Windows/Linux support device driver

Ordering Information

Model	Definition
Digital I/O USB I/O Terminal 8ch/8ch (isolated 12 - 24VDC) - the Y series DIO-0808LY2-USB	The position and orientation of the USB connector have been changed.^* Supports interrupt control function (8 input points) Supports digital filter function The device identification method has been changed from an internal ID to a switch setting, improving identification when multiple units are connected. Maximum number of concurrently usable units: 127 → 16. When switching from the conventional product, the device driver API-DIO (WDM) / API-DIO (LNX) must be updated to a supported version. * Please note that the main unit's USB connector is reversed from the previous model. * Support for new functions has been added. Existing APIs (functions) can still be used as before. There are no changes to the input/output specifications. * For details, please see datasheets and manuals.

Model

Definition

The position and orientation of the USB connector have been changed.^*
Supports interrupt control function (8 input points)
Supports digital filter function
The device identification method has been changed from an internal ID to a switch setting, improving identification when multiple units are connected.
Maximum number of concurrently usable units: 127 → 16.
When switching from the conventional product, the device driver API-DIO (WDM) / API-DIO (LNX) must be updated to a supported version.

*
Please note that the main unit's USB connector is reversed from the previous model.
*

Support for new functions has been added. Existing APIs (functions) can still be used as before.
There are no changes to the input/output specifications.
*
For details, please see datasheets and manuals.

Model	Description	Certification	Buy
DIO-0808LY-USB [Limited Stock]	[End of Repair Service : July 13, 2032] Digital I/O USB I/O Terminal 8ch/8ch (isolated 12 - 24VDC) - the Y series		Where to buy Order Online (U.S. only)

Item	Item Name
API-DIO(LNX)	Linux version Digital I/O Driver
API-DIO(WDM)	Windows Driver for Digital I/O Driver

Item	Item Name
ACX-PAC(W32)	ActiveX components sets for measurement system development
DAQ-DNC-FE	A collection of .NET components for DAQfast measurement system development.
DAQ-LV-WIN	LabVIEW Data Acquisition Library
VI-DAQ	VI Library of data acquisition for LabVIEW

Item	Item Name
BRK-USB-Y	Bracket for USB I/O Terminal products
CN6-Y14	14 pin Terminal connector(screw type) 6/set