CPS-MCS341G5-DS1-130 CONPROSYS M2M Controller - Configurable Type / 4G LTE / OPC UA / 1x LAN + HUB / 4x DI / 4x DO / 1x RS-232C

• Overview / Features
• Specifications
• Ordering Information
• Support / Downloads

Overview / Features

This product is a M2M controller with isolated digital input and output (Input : 4ch, Output : 4ch), RS-232C, LAN interface, Ethernet Hub, and a 4G LTE wireless network communication module. The devices of our CONPROSYS series can be configured as you desire. You can perform all processes on a web browser from the development to the operation. The functions such as Web monitoring of I/O information, alarm processing by I/O information, task divergence enable you to create a Cloud System at low cost and in a short time.
This product is equipped with an OPC UA server function ※, and can directly communicate with HMI and SCADA software that supports OPC UA clients provided by each company.
※ Can be used only with Ethernet communication, and does not support 4G / 3G and 920MHz wireless communication.

• Certification of 4G LTE Cat.4 standard

  • Following the regulation by the Radio Act, this products transmits the collected data to the cloud server through 4G LTE wireless communication network.
• Configurative modules

  • You can set the modules as you desire up to 16 devices. The total current consumption of the configurative devices should be less than 3.3A.
• No base board required

  • This product does not require a base board to install or connect. It helps set and remove the module(s) easily and smoothly.
• Web Monitoring and Web Task Script

  • The product contains a Web server (Java applet). Even with your PC located remotely, you can monitor and update I/O information through a Web browser. On the monitoring screen, you can freely lay out the standard GUI parts (graphic, slider, button, etc.). All operations including monitoring layout, making relations with I/O information, can be achieved via the Web browser. By combining icons such as arithmetic operations, conditional branching, data outputting, you can set up the executions or its processes like drawing them in the flowchart. All operation can be completed on the Web browser.
• Simple router function

  • Equipped with a simple routing function. It is possible to use a DHCP server, static routing, port routing and IP routing.
• Web Monitoring

  • The product contains a Web server (Java applet). Even with your PC located remotely, you can monitor and update I/O information through a Web browser. On the monitoring screen, you can freely lay out the standard GUI parts (graphic, slider, button, etc.). All operations including monitoring layout, making relations with I/O information, can be achieved via the Web browser.