Cables and Accessories for 50-pin Miniature Ribbon Connector Type

This section offers a clear explanation on selecting accessories, including terminal blocks, and connection cables. Contec offers a variety of convenient terminal blocks and connection cables, from "screw-type terminal blocks" whose terminal screws won't fall out even when loosened to genuine manufacturer cables that have passed Contec-specific outgoing inspections covering such aspects as static electricity and accuracy.

CN1:50-pin miniature ribbon connectors

*1

Please select a cable less than 1.5 m in length.

Wired with terminal block
Commonizing devices and accessories for 37-pin D-SUB connector type
Wired with loose-wire cable
Devices employing 50-pin miniature ribbon connectors

Wired with terminal block

	Cables (50-pin)		Accessories (50-point)
	0.5m PCB50PS-0.5P 1.5m PCB50PS-1.5P 3.0m PCB50PS-3P Shielded cables		EPD-50A Terminal blocks

*
Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

Accessories - 50 contact points (for 50-pin miniature ribbon connectors) -

EPD-A Series screw-type terminal block

Terminal screws won't fall off.
Have you ever heard yourself saying, "Removing the terminal screws when wiring R-type crimp terminal cables is too much trouble," or, "I loosened the terminal screw too much and now it's gone!" With a screw-type terminal block, you don't have to worry any more! Thanks to an internal spring that lifts up and holds the screws, terminal screws won't come off even when loosened.

Commonizing devices and accessories for 37-pin D-SUB connector type

This is the connection method when reusing and commonizing accessories for devices employing 37-pin D-SUB connectors.

	Conversion cables (37-pin)		Cables (37-pin)		Accessories (37-point)
	PCE50/37PS-0.5P Shielded cables		0.5m PCB37PS-0.5P 1.5m PCB37PS-1.5P 3.0m PCB37PS-3P 5.0m PCB37PS-5P Shielded cables 1.5m PCB37P-1.5 Flat cables		CM-32L EPD-37A EPD-37 DTP-3C DTP-4C Terminal blocks

*
Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

Wired with loose-wire cable

Wired with loose-wire cable and Accessories for 50-pin Miniature Ribbon Connector Type

	Cables (50-pin)
	0.5m PCA50PS-0.5P 1.5m PCA50PS-1.5P 3.0m PCA50PS-3P Shielded cables

*
Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

Devices employing 50-pin miniature ribbon connectors

Bus type	Model
PCI Express	DIO-1616T-LPE DIO-1616L-LPE DIO-1616B-LPE
PCI	PIO-16/16L(LPCI)H PIO-16/16B(LPCI)H PIO-16/16T(LPCI)H

Accessories compatibility