Cables and Accessories for 68-pin 0.8-mm Pitch Connector Type

• Connect to a terminal block
• Share with 50-pin connector-type products
• Connect to a discrete wire cable
• Counter Cards Connectable with a 68-pin 0.8-mm Pitch Connector

Connecting with a terminal block

	Cable (68-pin)		Accessory
	0.5m PCB68PS-0.5 1.5m PCB68PS-1.5 Shielded cable		EPD-68A Terminal block

• *
  When connecting a non-isolated TTL/LVTTL input/output, use a cable with a length of 1.5 m or shorter.

Accessory - 68 contact terminal block (for 68-pin 0.8-mm pitch connectors)

• 
  Screw lift-up crimp relay terminal block: EPD-A series

  Prevents terminal screws from falling out
  Terminal screws are generally a hassle to remove when working with R-type crimp terminal cables. On the other hand, loosening them too much can cause the screws to fall out.The screw lift-up type terminal block is the solution to these problems.Even when terminal screws are loose, the inner spring lifts up and holds the screw, preventing it from falling out.

  

Sharing 50-pin miniature ribbon connector-type devices and accessories

The following connection is for using or sharing devices and accessories with 5-pin miniature ribbon connectors.

	Conversion cable (50-pin)		Accessory
	0.5m CNT-68M/50M Shielded cable		CTP-4D Differential/TTL input conversion terminal EPD-50A Terminal block

Connecting with a discrete wire cable

	Cable (68-pin)
	0.5m PCA68PS-0.5P 1.5m PCA68PS-1.5P Shielded cable

• *
  When connecting a non-isolated TTL/LVTTL input/output, use a cable with a length of 1.5 m or shorter.

Counter Cards Connectable with a 68-pin 0.8-mm Pitch Connector

PCI Express

• 
  CNT-3204MT-LPE

PCI

• 
  CNT32-4MT(LPCI)

• Accessories compatibility
  • Analog I/O
  • Digital I/O
  • Serial communication
  • Counter
  • Motion control