Cables and Accessories for 96-pin Half Pitch Connector Type

• *
  Each connector needs cables.

• Connect to a terminal block
• Share with 37-pin connector-type products
• Connect to a discrete wire cable
• Counter Cards Connectable with a 96-pin Half Pitch Connector

Connecting with a terminal block

	Cable (96-pin)		Accessory
	0.5m PCB96PS-0.5P 1.5m PCB96PS-1.5P 3.0m PCB96PS-3P 5.0m PCB96PS-5P Shielded cable 1.5m PCB96P-1.5 3.0m PCB96P-3 Flat cable		EPD-96A EPD-96 DTP-64A CCB-96 Terminal block

• *
  When connecting a non-isolated TTL/LVTTL input/output, use a cable with a length of 1.5 m or shorter.

Accessory - 96 contact terminal block (for 96-pin half pitch connectors)

• 
  Screw lift-up crimp relay terminal block: EPD-A series

  Prevents terminal screws from falling out
  Terminal screws are generally a hassle to remove when working with R-type crimp terminal cables. On the other hand, loosening them too much can cause the screws to fall out.The screw lift-up type terminal block is the solution to these problems.Even when terminal screws are loose, the inner spring lifts up and holds the screw, preventing it from falling out.

  

Sharing 37-pin D-SUB connector-type devices and accessories

The following connection is for using or sharing devices and accessories with 37-pin D-SUB connectors.

	Conversion cable (37-pin x 2)		Accessory
	1.5m PCB96WS-1.5P 3.0m PCB96WS-3P 5.0m PCB96WS-5P Shielded cable		EPD-37A EPD-37 DTP-3C DTP-4C Terminal block

• *
  When connecting a non-isolated TTL/LVTTL input/output, use a cable with a length of 1.5 m or shorter.
• *
  This connection is not available for CNT-3208M-PE and CNT32-8M(PCI).

Connecting with a discrete wire cable

• *
  1 Please select a cable less than 1.5 m in length for TTL-level signal input.

	Cable (96-pin)
	0.5m PCA96PS-0.5P 1.5m PCA96PS-1.5P 3.0m PCA96PS-3P 5.0m PCA96PS-5P Shielded cable 1.5m PCA96P-1.5 3.0m PCA96P-3 5.0m PCA96P-5 Flat cable (48-pin x 2)

• *
  When connecting a non-isolated TTL/LVTTL input/output, use a cable with a length of 1.5 m or shorter.

Counter Cards Connectable with a 96-pin Half Pitch Connector

PCI Express

• 
  CNT-3208M-PE

PCI

• 
  CNT32-8M(PCI)
• 
  CNT24-4D(PCI)H

• Accessories compatibility
  • Analog I/O
  • Digital I/O
  • Serial communication
  • Counter
  • Motion control