Cables and Accessories for 100-pin, 0.8 mm Pitch Connector Type

This section offers a clear explanation on selecting accessories, including terminal blocks, and connection cables. Contec offers a variety of convenient terminal blocks and connection cables, from "screw-type terminal blocks" whose terminal screws won't fall out even when loosened to genuine manufacturer cables that have passed Contec-specific outgoing inspections covering such aspects as static electricity and accuracy.

CN A:100-pin, 0.8 mm pitch connectors/CN B:100-pin, 0.8 mm pitch connectors

Wired with terminal block

Cables (100-pin) Accessories (100-point)
100-pin, 0.8 mm pitch connectors CN A,CN B Both directions shared
接続

Terminal blocks

  • *
    Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

Accessories - 100 contact points (for 100-pin, 0.8 mm pitch connectors) -

Wired with loose-wire cable

Cables (100-pin)
100-pin, 0.8 mm pitch connectors CN A,CN B Both directions shared
  • *
    Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

Commonizing devices and accessories for 96-pin half-pitch connector type

This is the connection method when reusing and commonizing accessories for devices employing 96-pin half-pitch connectors.

Conversion cables (96-pin) Accessories (96-point)
100-pin, 0.8 mm pitch connectors CN A,CN B Both directions shared
接続

Terminal blocks

Connector conversion boards

  • *
    Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

Commonizing devices and accessories for 37-pin D-SUB connector type

This is the connection method when reusing and commonizing accessories for devices employing 37-pin D-SUB connectors.

Conversion cables (37-pin ×2) Accessories (37-point)
100-pin, 0.8 mm pitch connectors CN A,CN B Both directions shared

Double-ended shielded cables

接続

Terminal blocks

  • *
    Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

Devices employing 100-pin, 0.8 mm pitch connectors

To PageTop