Cables and Accessories for 68-pin Half Pitch Connector Type

This section offers a clear explanation on selecting accessories, including terminal blocks, and connection cables. Contec offers a variety of convenient terminal blocks and connection cables, from "screw-type terminal blocks" whose terminal screws won't fall out even when loosened to genuine manufacturer cables that have passed Contec-specific outgoing inspections covering such aspects as static electricity and accuracy.

CN1:68-pin, 0.8 mm pitch connector type/CN A,CN B:68-pin, 0.8 mm pitch connector ×2 types

Cables and Accessories for 68-pin Half Pitch Connector Type

  • *1
    Each connector needs cables and accessories.

Wired with terminal block

68-pin, 0.8 mm pitch connector type

Cables (68-pin) Accessories (68-point)
CN1:68-pin, 0.8 mm pitch connectors
接続

Terminal blocks

  • *
    Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

68-pin, 0.8 mm pitch connector ×2 types

Cables (68-pin) Accessories (68-point)
68-pin, 0.8 mm pitch connectors CN A,CN B Both directions shared
接続

Terminal blocks

  • *
    Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

Accessories - 68 contact points (for 68-pin, 0.8 mm pitch connectors) -

Commonizing devices and accessories for 96-pin half-pitch connector type

This is the connection method when reusing and commonizing accessories for devices employing 96-pin half-pitch connectors.

68-pin, 0.8 mm pitch connector type

Conversion cables (96-pin) Accessories (96-point)
CN1:68-pin, 0.8 mm pitch connectors

Shielded cables

接続

Terminal blocks

68-pin, 0.8 mm pitch connector ×2 types

Conversion cables (96-pin) Accessories (96-point)
68-pin, 0.8 mm pitch connectors CN A,CN B Both directions shared

Shielded cables

接続

Terminal blocks

Wired with loose-wire cable

Wired with loose-wire cable and Accessories for 68-pin Half Pitch Connector Type

68-pin, 0.8 mm pitch connector type

Cables (68-pin)
CN1:68-pin, 0.8 mm pitch connectors
  • *
    Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

68-pin, 0.8 mm pitch connector ×2 types

Cables (68-pin)
68-pin, 0.8 mm pitch connectors CN A,CN B Both directions shared
  • *
    Use a cable no longer than 1.5 m for non-isolated TTL/LVTTL I/O devices.

Devices employing 68-pin half-pitch connectors

Bus type Model

To PageTop