CNT24-4(PCI)H Counter PCI card 4ch (24bit Up/Down count 1MHz) / Incremental encoder interface

  • Standard Warranty3 yrs
  • Extended WarrantyAvailable
  • It is equipped with four channels of 24-bit up/down counters.
  • The board can count two-phase signals, which can be outputs of some rotary encoders and linear scales
  • You can select either a photo coupler isolated input or a TTL-level input for each channel by software command.
  • Each channel can generate an interrupt request signal and a one-pulse output signal when the count data matches a pre-specified value.
  • The board is equipped with a programmable timer to allow interrupts to be generated periodically according to a specified timer value.
  • Each Channel is equipped with a general-purpose input signal (both photo coupler and TTL-level).
  • *
    For details about an extended warranty, please contact us.

Specifications

Add-on Module

Series -
Bus Specification PCI
Size Short Size
Used Connector D-SUB 37-pin (Female); Pin Header 30-pin (Male)

Counter

Number of Channels 4-ch
Counting System 24-bit Up/Down count
Response speed 500KHz [isolation] / 1MHz [non-isolation]

Supported OS

Supported OS Windows 11 (64-bit); Windows 10 IoT Enterprise LTSC 2021 (64-bit); Windows 10 IoT Enterprise 2019 LTSC (64-bit); Windows 10 IoT Enterprise LTSB 2016 (64-bit); Windows 10 (64-bit); Windows 10 (32-bit); Windows 8.1 (64-bit); Windows 8.1 (32-bit); Windows 7 (64-bit); Windows 7 (32-bit); Windows Vista (64-bit); Windows Vista (32-bit); Windows XP (64-bit); Windows XP (32-bit); Windows 2000 (32-bit); Windows Server 2008 (64-bit); Windows Server 2008 (32-bit); Windows Server 2003 (64-bit); Windows Server 2003 (32-bit); Linux
  • *
    The supported OS differs depending on the software used for this product. For more details about supported OS and distribution, please refer to the software Readme or online help.

To PageTop