CNT32-8M(PCI) Counter PCI card 8ch (32bit Up/Down count 10MHz) / Incremental encoder interface

Standard Warranty3 yrs
Extended WarrantyAvailable

Capable of receiving two-phase and single-phase signals.
Capable of receiving pulse signals of up to 10 MHz (The minimum discernible phase difference in two-phase signal input mode is 25 nsec.)
Capable of selecting the differential line receiver input or TTL level -compatible input mode for each channel.
Protective device attached to the input circuit, providing surge protection.

*
For details about an extended warranty, please contact us.

Supported OS

Specifications

Add-on Module

Series	-
Bus Specification	PCI
Size	Short Size
Used Connector	1.27mm-pitch 96-pin (Male); 2x Pin header 10-pin (Male)

Counter

Number of Channels	8-ch
Counting System	32-bit Up/Down count
Response speed	10MHz [TTL] / 10MHz [differential]

Supported OS

Supported OS	Windows 11 (64-bit); Windows 10 IoT Enterprise LTSC 2021 (64-bit); Windows 10 IoT Enterprise 2019 LTSC (64-bit); Windows 10 IoT Enterprise LTSB 2016 (64-bit); Windows 10 (64-bit); Windows 10 (32-bit); Windows 8.1 (64-bit); Windows 8.1 (32-bit); Windows 7 (64-bit); Windows 7 (32-bit); Windows Vista (64-bit); Windows Vista (32-bit); Windows XP (64-bit); Windows XP (32-bit); Windows 2000 (32-bit); Windows Server 2008 (64-bit); Windows Server 2008 (32-bit); Windows Server 2003 (64-bit); Windows Server 2003 (32-bit); Linux

Windows 11 (64-bit); Windows 10 IoT Enterprise LTSC 2021 (64-bit); Windows 10 IoT Enterprise 2019 LTSC (64-bit); Windows 10 IoT Enterprise LTSB 2016 (64-bit); Windows 10 (64-bit); Windows 10 (32-bit); Windows 8.1 (64-bit); Windows 8.1 (32-bit); Windows 7 (64-bit); Windows 7 (32-bit); Windows Vista (64-bit); Windows Vista (32-bit); Windows XP (64-bit); Windows XP (32-bit); Windows 2000 (32-bit); Windows Server 2008 (64-bit); Windows Server 2008 (32-bit); Windows Server 2003 (64-bit); Windows Server 2003 (32-bit); Linux

*
The supported OS differs depending on the software used for this product. For more details about supported OS and distribution, please refer to the software Readme or online help.