Overview / Features
This product is industrial switching HUB, which is small size[39(W) X 120(D) X 94(H)mm] with 8 ports. SH-9008-FIT is an IEEE-802.3 (Ethernet)/IEEE-802.3u (Fast Ethernet)/IEEE-802.3ab (Gigabit Ethernet) compliant, auto-recognition function of communication rates (10/100/1000Mbps) and communication methods (half/ full duplex) by the auto-negotiation feature. It possess a jumbo frame, AutoMDI/MDI-X, auto negotiation or an electricity self-adjustment function. By an electricity self-adjustment function, reduction of the consumption electricity of about 80% at the maximum is possible. The various setting is possible by simple putting on and taking off DIN rail fixation mechanism, fixed metal fittings and Gom foot.
-
- It carries eight ports base on the IEEE802.3ab(1000BASE-T) / IEEE802.3u(100BASE-TX)/ IEEE802.3(10BASE-T) standard in small body(39(W) x 120(D) x 94(H)mm). By an FAN less, It can be used at the place where the silent nature is pursued. In addition, by the adoption of the metal housing that was superior in the radiation of heat nature, It realizes use ambient temperature 0-50°C.
-
- It is compatible with Jumbo Frame that increases transfer rate. Connection with Jumbo Frame compatible devices increases data transfer rate and contributes to increased transfer rate and reduced CPU load.
-
- The Auto MDI/MDI-X feature automatically determines straight or cross cable, avoiding wiring trouble due to wiring mistake. Moreover, auto-recognition function of communication rates (10/100/1000Mbps) and communication methods (half/full duplex) by the auto-negotiation feature.
-
- It can reduce consumption electricity of about 80%* at the maximum by coordinating the consumption electricity of the unused port automatically. * It is compared consumption electricity by actual survey, when all ports(8 ports) movement and all ports (8 ports) no working.
-
- 35mm DIN rail mounting mechanism is equipped on the unit as standard. Flat putting fixing brackets make installation to be possible in all directions (floor, ceiling, etc.). In addition, rubber feet make installation on the floor to be possible.
-
- It is compatible with 12 - 24VDC wide range power and can be used in various power environment. In addition, An FG terminal is equipped in the power connector.