IPC-BX801-DC BX-830 - Fanless Embedded PC / Wide Operating Temperature Range / Vehicle-mount / Atom E3845 (BayTrail SoC) / DC Power Supply

  • Discontinued
  • Ultra-low voltage Celeron M 1GHz, 852GM chip set, and 512MB of memory
  • Extended interfaces located at the front for easier maintenance
  • Operation guaranteed in a temperature range from -20 to +60°C with a vibration resistance of 5G and an impact resistance of 100G
  • Safety design required for embedded applications
  • The adoption of a fan-less, CF card configuration providing high levels of reliability and quietness
  • *
    For details about an extended warranty, please contact us.

Overview / Features

This product is a small embedded computer that can be used under severe operating conditions such as high/low temperatures and vibrations. It contains a power-saving high-performance Celeron (R) M process 1GHz, 852GM chip set and 512MB of memory. A number of extended interfaces such as serial, USB2.0 and LAN are all placed on the front side of the main body for easier maintenance. Adopting a CF card which has eliminated any moving parts, the product ensures maximum quietness.

  • Ultra-low voltage Celeron M 1GHz, 852GM chip set, and 512MB of memory
    • The product has a power-saving, high-performance, ultra-low voltage Intel (R) Celeron (R) M processor with 1GHz(FSB400MHz), Intel (R) 852GM chip set, and 512MB of memory.
  • Extended interfaces located at the front for easier maintenance
    • Extended interfaces such as serial (RS-232C) x 3, USB2.0 x 2, 100BASE-TX x 1 and audio interfaces are all placed at the front, providing excellent maintenance advantages. In addition to a general-purpose analog RGB interface, the product has an LVDS interface, which enables dual screen display.
  • Operation guaranteed in a temperature range from -20 to +60°C with a vibration resistance of 5G and an impact resistance of 100G
    • The radiation structure with a built-in heater and the cabinet ensures a stable operation at any temperature between -20 and +60 °C. With a vibration resistance of 5G and an impact resistance of 100G, the product can also be used for mobile devices.
  • Safety design required for embedded applications
    • Unnecessary trouble can be avoided by the use of insulation lock clamps for prevention of cable disconnection and the use of metal fittings for prevention of CF card disconnection. An abnormal voltage or emperature is detected to shut down the system automatically. Retention of CMOS data by EEPROM allows the system to start up even when the battery has run out.
  • The adoption of a fan-less, CF card configuration providing high levels of reliability and quietness
    • As the cabinet itself forms an aluminum heat sink without a fan and with a CF card (bootable) as the storage device, high levels of reliability and quietness have been achieved.

To PageTop